Author Topic: Brake reservoir port  (Read 151 times)

CJHenderson

  • Full Member
  • Silver
  • ****
  • USA, AR, Benton
  • Posts: 486
Brake reservoir port
« on: June 15, 2025, 22:40:39 »
Which reservoir port goes to the front, and which goes to the rear brakes?
1970 280SL/8 W113 101624 miles.
1950 MG-TD
2021 Harley Davidson CVO Trike

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1507
Re: Brake reservoir port
« Reply #1 on: June 16, 2025, 06:15:57 »
Hi,
I'm not sure if I've understood your question correctly, but maybe the pictures in the links will help:
- https://www.sl113.org/forums/index.php?topic=33686.msg246545#msg246545
- https://www.sl113.org/forums/index.php?topic=25854.msg185145#msg185145
...WRe

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5754
Re: Brake reservoir port
« Reply #2 on: June 16, 2025, 13:10:43 »
You can probably determine that by following the lines coming out of the ports?
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1507
Re: Brake reservoir port
« Reply #3 on: June 16, 2025, 17:35:48 »
Hi,
If the orientation of the brake lines was meant, it is not really possible to mix them up, as two lines are connected at the end (from the point of view of the brake booster) of the brake master cylinder for the front brakes and only one at the front of the brake master cylinder for the rear brakes.
...WRe

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17