Author Topic: A/c ready wiring harnesses for w113  (Read 174 times)

lpeterssen

  • Vendor
  • Gold
  • *****
  • USA, FL, Miami
  • Posts: 514
A/c ready wiring harnesses for w113
« on: September 16, 2023, 21:07:25 »
Dear friends

Another product discussed with my friend Pawel is a ready to go wiring harness kit to install air conditioning systems on any MB pagoda using the logic I like the most which comes from MB w109-6.3

This will be a DIY harness kit that will be ready to install in your loved pagoda and will have the proper logic to run any A/c system.

It will:

1. Take energy from an auxiliary OEM Mercedes 2 port fuse box.  That fuse box will fed by a relay active only with ignition on, and will have power inhibition while you crank (starter active)your car.
2. Will have dedicated relay to drive your auxiliary condenser fan which will be triggered by refrigerant gas pressure and radiador water temp.
3. Will have an adjustable radiator fan temp. triggering probe
4. Will have terminals for a pressure switch at the firewall right side, just where mercedes recomendó to have the desiccant/dryer canister.
5. Will have the necessary branch to feed and receive signals from your cabin evaporator core.
6. Of course cable end for your compressor clutch


This harness will be available for sale soon. Please comment.

Best regards
L.Peterssen
« Last Edit: September 24, 2023, 10:06:40 by lpeterssen »

TJMart

  • Full Member
  • Silver
  • ****
  • USA, NC, Matthews
  • Posts: 306
Re: A/c ready to wiring harnesses for w113
« Reply #1 on: September 17, 2023, 16:45:44 »
It look like you have thought everything through. I will be interested in one when they are available.

Tony
Tony
1970 280SL, 4 Speed

lpeterssen

  • Vendor
  • Gold
  • *****
  • USA, FL, Miami
  • Posts: 514
Re: A/c ready to wiring harnesses for w113
« Reply #2 on: September 17, 2023, 18:38:35 »
Wonderful TJ will be in contact

Best regards
Lp