Hazet 2770-3 (17mm) or equivalent

[russelljones48]

my searches for this wrench haven't turned up a single wrench..  is there another one available from a different manufacturer?  or does someone here have one they'd be willing to sell?  my next step will be to fabricate one but that will take some time and $$$$

[Tyler S]

Snap-on also makes one. Part # S6014 There are a few no name brands on ebay as well.

https://www.ebay.com/p/Snap-on-17mm-1-2-Drive-Valve-Adjustment-Tool-S6014/1926243914?

[teahead]

can use this too?

https://mercedessource.com/store/m130-m180-special-valve-adjustment-17mm-socket-wrench

[114015]

Hazet 329


https://www.google.de/search?safe=strict&source=hp&ei=yIhuXYmvHY3DgQb0io6ICg&q=Hazet+329

[scoot]

I have the one for removing/installing injection lines, etc.   Is that what you are looking for?  I think I actually have 2...

[russelljones48]

Thanks all...   I bought the Snap On but if there's any slippage I'll get the 1 from Mercedessource..  funny because I went through his site earlier and didn't see that wrench..

rj

[MikeSimon]

First special maintenance tool I bought after I got my Pagoda.

[114015]

I have the one for removing/installing injection lines, etc.   Is that what you are looking for?  I think I actually have 2...

No Scott...,
Yours look very similar but is not the same.
The original valve adjustment tools are simple open mouth crowfoot wrenches but with a very thick and solid open mouth ending - regular wrenches are too soft for the adjustment and can 'damage' the valve adjustment ball studs (ask me how I know...)
...
but the wrench you are referring to looks like a boxed wrench - double hexagon - only open mouth too and crowfoot-like; so, like a 3/4 closed boxed wrench.
I have one like yours as well - extremely usefull for the injection lines, especially for the fittings on the fuel injection pump! Almost impossible to do the job properly with a regular open mouth wrench...

Best,
Achim