Pagoda SL Group
W113 Pagoda SL Group => Wanted To Buy => Topic started by: russelljones48 on September 03, 2019, 13:07:32
-
my searches for this wrench haven't turned up a single wrench.. is there another one available from a different manufacturer? or does someone here have one they'd be willing to sell? my next step will be to fabricate one but that will take some time and $$$$
-
Snap-on also makes one. Part # S6014 There are a few no name brands on ebay as well.
https://www.ebay.com/p/Snap-on-17mm-1-2-Drive-Valve-Adjustment-Tool-S6014/1926243914?
-
can use this too?
https://mercedessource.com/store/m130-m180-special-valve-adjustment-17mm-socket-wrench
-
Hazet 329
https://www.google.de/search?safe=strict&source=hp&ei=yIhuXYmvHY3DgQb0io6ICg&q=Hazet+329
-
I have the one for removing/installing injection lines, etc. Is that what you are looking for? I think I actually have 2...
-
Thanks all... I bought the Snap On but if there's any slippage I'll get the 1 from Mercedessource.. funny because I went through his site earlier and didn't see that wrench..
rj
-
First special maintenance tool I bought after I got my Pagoda. 8) ;D
-
I have the one for removing/installing injection lines, etc. Is that what you are looking for? I think I actually have 2...
No Scott...,
Yours look very similar but is not the same.
The original valve adjustment tools are simple open mouth crowfoot wrenches but with a very thick and solid open mouth ending - regular wrenches are too soft for the adjustment and can 'damage' the valve adjustment ball studs (ask me how I know...) :o
...
but the wrench you are referring to looks like a boxed wrench - double hexagon - only open mouth too and crowfoot-like; so, like a 3/4 closed boxed wrench.
I have one like yours as well - extremely usefull for the injection lines, especially for the fittings on the fuel injection pump! Almost impossible to do the job properly with a regular open mouth wrench...
Best,
Achim