Pagoda SL Group
»
W113 Pagoda SL Group
» Drive train, fuel, suspension, steering & brakes
View full version:
Drive train, fuel, suspension, steering & brakes
«
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
»
Engine Bay Work Advice Needed
Engine removal from the bottom (silly question or a concern)
Does antifreeze go bad in the bottle?
Part number for input shaft and output shaft bearings for 4 speed Manual gearbox
Throttle Shaft Bearing Replacement
Fuel tank draining technique
Injection pump getting fuel?
Standard short pump?
Fuel evap canister
Crankshaft install...to tight?
230SL bad engine running/starting mini tour Part 5 : WRD and Starting Magnet
rpm in 5th gear
Dwell changes depending on RPM
Kick Down Switch going wild
MOVED: Alternatives to recommended coolant
altitude compensator for 8000 ft
Slotted Nut - Manual Trans
Will not go into reverse (automatic)
Car wont start! - the battery is not dead, but it won't turn over.
Clutch Reservoir - Lower rubber hose alignment
Oil for manual gearbox and differential
Can’t remove transmission filter?
Hard to shift (manual trans)
tightening torque
230SL bad engine running/starting mini tour Part 4 : FIP basic mixture control
Accelerator mounting help- any pics
Gear link bush
230SL bad engine running/starting mini tour Part 3: CSV, injectors ,checkvalves
autotrans gearbox mount -now not changing gears smoothly
acceleration link
280 SL v 280 SE
replacing SL engine with 280SE engine -- what do I need to know?
None LSD differential oil
230SL bad engine running/starting mini tour Part 2 : Air and Fuel supply
engine ovrerhaul
Hot start issues pole.
230SL bad engine running/starting mini tour Part 1 : the basics
Plastiguage- correct tolerance?
Intermittent stalling M130
Ignition timing question
Engine starting aid failed and confused
250SL cold start spray nozzle
Rear Spring Paint Mark/Dot Decoder - 3 red, 3 yellow (280SL)
How bad i mess up distributor?
250 SL Auto idle speed
WRD YouTube Video
heat shield color and finish queston
4 years no start- loud at start up
Strange sound from the front when driving
Going to be rebuilding an M180, any tips, tricks I need to be aware of?