« previous next »
Pages: [1]

Author Topic: Seatbelt holder  (Read 3814 times)

Leif

  • Full Member
  • Junior Level
  • Norway, Rogaland, Stavanger
  • Posts: 5
Seatbelt holder
« on: April 25, 2021, 18:13:35 »
Seatbelt holders attached to the headrest legs, manufactured in polished stainless steel for sale.
Price for a set, one reight and one left, $120,- pluss postage.
Please direct order to: mb230sl@lyse.net

First set shipped to Florida to day, 04.27.21
Second pair shipped to Washington to day 05.08.21
Total of 8 pairs shipped last week as pr 05.19.21
« Last Edit: May 19, 2021, 20:48:07 by Leif »
Logged

awolff280sl

  • Full Member
  • Gold
  • *****
  • USA, FL, Sarasota
  • Posts: 607
Re: Seatbelt holder
« Reply #1 on: May 08, 2021, 21:40:53 »
Some feedback on these seat belt guides.
They are very nice and a good upgrade from the plastic holders that I had before.
I have retractable belts and my previous holders (MB, plastic) kept coming apart, a pita for a daily driver.
These holders are simple, sturdy, elegant and fit well. Nice and tight and I had to use a bit of silicone grease to slide them on.
Logged
Andy   Sarasota, FL
'69 280SL 4speed
'06 Mitsubishi Evo

mnahon

  • Full Member
  • Silver
  • ****
  • Canada, QC, Montreal
  • Posts: 414
Re: Seatbelt holder
« Reply #2 on: May 08, 2021, 23:08:11 »
Can you post a picture of them installed?

Thanks, Meyer
Logged
Meyer Nahon
Montreal, Canada
1968 MB 280SL Auto Euro LHD Silver
2021 Tesla Model 3

awolff280sl

  • Full Member
  • Gold
  • *****
  • USA, FL, Sarasota
  • Posts: 607
Re: Seatbelt holder
« Reply #3 on: May 09, 2021, 01:08:08 »
sure
Logged
Andy   Sarasota, FL
'69 280SL 4speed
'06 Mitsubishi Evo

Leif

  • Full Member
  • Junior Level
  • Norway, Rogaland, Stavanger
  • Posts: 5
Re: Seatbelt holder
« Reply #4 on: May 09, 2021, 08:12:55 »
The design is handed, and from your picture it looks like you have mounted them on opposit hand.  If you change over, you will get the belt even closer to your shoulder.
Logged

awolff280sl

  • Full Member
  • Gold
  • *****
  • USA, FL, Sarasota
  • Posts: 607
Re: Seatbelt holder
« Reply #5 on: May 10, 2021, 21:33:55 »
yes, even better
Logged
Andy   Sarasota, FL
'69 280SL 4speed
'06 Mitsubishi Evo

Chris Long

  • Full Member
  • Senior
  • ***
  • USA, NJ, Morristown
  • Posts: 172
Re: Seatbelt holder
« Reply #6 on: May 13, 2021, 14:01:51 »
Sent funds for a pair. Thanks
Logged
1970 280sl 4-Speed Horizon Blue

Leif

  • Full Member
  • Junior Level
  • Norway, Rogaland, Stavanger
  • Posts: 5
Re: Seatbelt holder
« Reply #7 on: May 18, 2021, 08:19:03 »
In the post now!
Thank you for your trade
Logged

Sam SL

  • Full Member
  • Regular
  • **
  • Canada, British Columbia, Vancouver
  • Posts: 53
Re: Seatbelt holder
« Reply #8 on: May 24, 2021, 18:15:28 »
Does the belt slip into the loop somehow and not removal of the belt is required? 
Logged
Sam

'71 280 SL  -- Green Queen
82 300D
92 500E
97 SL500

Leif

  • Full Member
  • Junior Level
  • Norway, Rogaland, Stavanger
  • Posts: 5
Re: Seatbelt holder
« Reply #9 on: June 06, 2021, 12:54:31 »
Correct, it slips in / out in an easy hand move, but remain in the loop as long as you do not intentionally remove it.
Logged

Rahul

  • Full Member
  • Senior
  • ***
  • Bermuda, Devonshire, Paget
  • Posts: 205
  • 1971 280SL automatic #571, parchment
Re: Seatbelt holder
« Reply #10 on: June 15, 2021, 02:27:40 »
Fitted mine today, great quality and looks very tidy.

Thanks Leif!
Logged
1971 280SL auto #571 over parchment
Pages: [1]
« previous next »