Author Topic: Heater control unit part  (Read 2137 times)

Sead

  • Vendor
  • Senior
  • ***
  • Bosnia and Herzegovina, Federation of Bosnia and Herzegovina, Sarajevo
  • Posts: 242
Heater control unit part
« on: November 11, 2019, 17:55:20 »
Hello,
i am looking for this part from the picture...

regards
Sead
1964 230SL

gcw206

  • Full Member
  • Regular
  • **
  • USA, WA, Seattle
  • Posts: 76
Re: Heater control unit part
« Reply #1 on: November 14, 2019, 20:07:49 »
Hello,
I recently rebuilt/replaced the control unit/cables in my 1969 280SL, and found that this particular MBZ OE part to be very hard to source. 
I ended up using a reproduction part sold by Buds' Benz. 
You appear to have a 230SL?  Might check first to see if parts are interchangeable with 280SL (I know levers are different).
Since you have it apart, you might want to change out the cables as well; made a big difference.
Galen

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7136
  • Benz Dr.
Re: Heater control unit part
« Reply #2 on: November 14, 2019, 20:49:12 »
We call those things '' pill bottles '' around here. They're also used on 108/109 cars but only on the right side controls. I save every one I can find but if they're not too hacked up you might be able to fix them with a bit of epoxy like JB Weld. I fix whatever I can and only replace them when they're too far gone.

Not all of the 108/109 parts interchange but anything is better than nothing at all.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC