Author Topic: Crank Specs  (Read 88 times)

johnk

  • Full Member
  • Gold
  • *****
  • USA, OH, Avon
  • Posts: 517
Crank Specs
« on: November 11, 2019, 02:40:13 »
Can anyone tell me what the specs are for a 280 crank?
The machine shop doesn't have the specs but says my main is 2.505 and my rods are 2.0315 and I need to figure out which bearing to order.


thanks!

John
John Krystowski
Avon Ohio
1968 Euro 280sl under restoration
1986 Porsche 930 "Special Wishes" turbo for sale
2016 Jag F-Type R
1950 Alfa Romeo 6C 2500 SS
2008 E350
2007 GL 450

Charles 230SL

  • Full Member
  • Silver
  • ****
  • USA, GA, Griffin
  • Posts: 310
  • 64 230SL
Re: Crank Specs
« Reply #1 on: November 11, 2019, 13:58:31 »
The machine shop doesn't have the specs but says my main is 2.505 and my rods are 2.0315 and I need to figure out which bearing to order

hi John, probably a typo but, the main and rod journal diameters provided by the machine shop appear to be larger than standard. 
Standard diameter (inches) for the mains without regrind is 2.3604 - 2.3608, and the rods 1.8879 - 1.8883. 

See page 5-267 of the attached. vr, Charles