Author Topic: Heritage Trim  (Read 3045 times)

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 388
  • 280SL Mfg date AUG 1969
Heritage Trim
« on: April 15, 2019, 16:25:09 »
I am ready to redo the seats and upholstery in my 280SL and had been considering using Heritage Trim and Upholstery in Palm Springs because of there use of Skived leather. However, I have been trying to contact them for the past 2 weeks and they only have voicemail on their phone and they do not answer emails.

I have also noticed that they were running some pricing specials recently, so I am wondering if they are still in business?

I am also wondering if there are any other upholsterers that use skived leather?

Roland
RB

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4108
Re: Heritage Trim
« Reply #1 on: April 15, 2019, 17:41:39 »
Yes, they are in business, not sure why no response however. They are also a sponsor of PagodaFest, and plan to be at the event.
The number I have is 360-332-9302 (Tony's cell - 760-424-9286)
Email - info@heritagetrim.com
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 388
  • 280SL Mfg date AUG 1969
Re: Heritage Trim
« Reply #2 on: April 15, 2019, 21:42:55 »
Heritage Trim and Upholstery is very much alive and well. Tony called while I was on the road this afternoon and we had a long talk. Apparently they had some kind of a glitch with the online form that I filled out to send him my request and he did not receive it. Same for my email. But all is well with Heritage. They have many Pagodas in the shop right now.
RB

pj

  • Full Member
  • Gold
  • *****
  • Canada, ON, London, Ontario
  • Posts: 559
  • 1965 230SL
    • my home page
Re: Heritage Trim
« Reply #3 on: April 16, 2019, 07:37:42 »
I talked to Tony back in February. He seemed very enthusiastic and friendly. Turns out he spent some of his teenage years here in Southwestern Ontario. I wish it wasn't so far to PagodaFest, so I could get a chance to meet him face-to-face
Peter J
1965 230SL #09474 named Dagny
2018 B250 4matic named Rigel

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 388
  • 280SL Mfg date AUG 1969
Re: Heritage Trim
« Reply #4 on: April 16, 2019, 12:47:54 »
Spoke with Tony again last night and he discovered that his server was full thus not allowing any new messages through. So, if anyone else has sent an email the the “info” address or left a query on the webpage, that is why it hasn’t been answered.
RB

wwheeler

  • Vendor
  • Platinum
  • ******
  • USA, TX, Dallas
  • Posts: 2862
Re: Heritage Trim
« Reply #5 on: April 16, 2019, 19:46:45 »
Regarding the skived leather, most good leather suppliers can do this. I believe GAHH might have biggest skive machine and can do 14" wide x 36" long. That is about as large of a piece as most do. I sent a potion of my leather to GAHH for skiving and came out well.

Keep in mind that there is only a limited need for skived material for these cars. You only use it when you have to (tight corners, radius', etc.) because it has far less strength and less resistance to tearing than the standard thickness.
Wallace
Texas
'68 280SE W111 coupe
'60 220SE W128 coupe
'70 Plymouth Roadrunner 440+6

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 388
  • 280SL Mfg date AUG 1969
Re: Heritage Trim
« Reply #6 on: April 16, 2019, 23:54:56 »
Heritage makes the point that Mercedes used it on the piece over the instrument cluster and other places that have curves like that.

Did you do your own application?
RB

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4108
Re: Heritage Trim
« Reply #7 on: April 17, 2019, 16:38:49 »
It is pretty cool to watch what they can do with leather, and what they have found when replacing the coverings on the dash and instrument binnacle.
They can also "weld" leather pieces, recreating some very nice touches.
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

wwheeler

  • Vendor
  • Platinum
  • ******
  • USA, TX, Dallas
  • Posts: 2862
Re: Heritage Trim
« Reply #8 on: April 17, 2019, 17:36:32 »
No, I didn't do the dash pads myself but am aware of the process. The W111s have some leather on the dash face and the skived leather is also used there. If you don't, the glove box will not fit correctly. I did glue the dash face pieces on however. You have to be super careful not the stretch it too much or the finish color on top will look ripped. Yep, the fit on these dashes is that close. 

The hardest application on the W111 is the instrument binnacle and skived material is a must here. No way could I do that and left to an expert.
Wallace
Texas
'68 280SE W111 coupe
'60 220SE W128 coupe
'70 Plymouth Roadrunner 440+6

Lotus211

  • Full Member
  • Junior Level
  • *
  • New Zealand, Wellington, Wellington
  • Posts: 19
Re: Heritage Trim
« Reply #9 on: April 26, 2019, 04:19:18 »
I'm just sending my 230SL interior to Heritage  next week from New Zealand, I have spoken to Tony several times and I have full confidence in their product.
I will report back when I see the finished product. :)
1964 Mercedes 230SL

rbouch8828

  • Full Member
  • Silver
  • ****
  • USA, MA, Framingham
  • Posts: 388
  • 280SL Mfg date AUG 1969
Re: Heritage Trim
« Reply #10 on: April 27, 2019, 19:27:31 »
I'm just sending my 230SL interior to Heritage  next week from New Zealand, I have spoken to Tony several times and I have full confidence in their product.
I will report back when I see the finished product. :)

What kind of a number did you come up with for an insurance estimate for shipping purposes for your interior?

Best,
Roland
RB