Author Topic: finishing of seat bases rear  (Read 1450 times)

swood1

  • Full Member
  • Senior
  • ***
  • United Kingdom, England, Worcester
  • Posts: 247
finishing of seat bases rear
« on: September 14, 2018, 08:06:46 »
Hi all,

Does anyone have any photos showing the rear of the seat base for me please?  My seats were in a bad state prior so I have nothing to refer back to.  I have got some new pads and seat covers and wondering how the back of the lower seat is attached to the seat frame. I guess there should be a steel bar that passes through the leather but how is it retained.

Regards

Steven
250 SL (early), in bits. Triumph TR4a

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1378
Re: finishing of seat bases rear
« Reply #1 on: September 14, 2018, 09:09:45 »
Hi,
maybe this picture can help.
...WRe

swood1

  • Full Member
  • Senior
  • ***
  • United Kingdom, England, Worcester
  • Posts: 247
Re: finishing of seat bases rear
« Reply #2 on: September 14, 2018, 10:32:46 »
Thanks for this, I can see you have used hog rings to hold the leather in place.  I can do the same.


Regards

Steven
250 SL (early), in bits. Triumph TR4a