Author Topic: Cleaning oil from coolant system W113  (Read 3822 times)

col320ce

  • Full Member
  • Gold
  • *****
  • Australia, Victoria, Glen Iris
  • Posts: 590
Cleaning oil from coolant system W113
« on: November 18, 2016, 23:32:28 »
Head gasket replaced and the cause fixed however there is still sludgy oil in the coolant system. I've been running the car with just water and flushing it but it's not that effective. I've seen some people use dish-washing powder and L-11 oil emulsifier but I want to be sure not to damage anything. I'm in Australia and cant find L-11.  Any suggestions?

Thanks for any help

1964 230SL
Col

1964 230SL
1965 250SE coupe
1993 320CE Sportline

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7410
Re: Cleaning oil from coolant system W113
« Reply #1 on: November 19, 2016, 06:53:28 »
I always had good luck with Dawn liquid dishwashing soap.
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2914
    • http://www.colinferns.com
Re: Cleaning oil from coolant system W113
« Reply #2 on: November 20, 2016, 17:06:23 »
Mercedes sell a product for this, I think it's granulated citric acid.
I use Forte fuel system cleaner!

WRe

  • Full Member
  • Platinum
  • ******
  • Germany, Hessen, Seeheim-Jugenheim
  • Posts: 1445
Re: Cleaning oil from coolant system W113
« Reply #3 on: November 20, 2016, 17:57:19 »
Hi,
attached the description of cleaning the cooling system with citric acid as recommended in MB WIS. Afaik it's "only" to remove chalky deposits/limescale in the cooling system but not for oil: http://www.w126.kistinger.com/Kuehlsystem_reinigen.htm.
...WRe

Tyler S

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Encinitas
  • Posts: 1613
Re: Cleaning oil from coolant system W113
« Reply #4 on: November 23, 2016, 22:40:09 »
You want somthing that captures and suspends the oil in the solution so it can be flushed out. Liquid Tide detergent is what we used at the dealer. It doesn't suds up like dishwashing liquid. Half a cup is plenty. Stick your garden hose in your expansion tank and keep running the engine with the heater valve open. Keep draining at the rad until its clear.
1968 (67) 250sl. 4 speed manual. DB180 Silver
1955 220 Cabriolet A. White Grey
2019 E450 Wagon. Majestic Blue
1936 Ford PU Flathead V8. Creme on tan interior.
1989 Volkswagen T3 Westfailia Campmobile. Dove Grey (blue)

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2914
    • http://www.colinferns.com
Re: Cleaning oil from coolant system W113
« Reply #5 on: November 24, 2016, 19:27:37 »
The MB product does remove the oil.

col320ce

  • Full Member
  • Gold
  • *****
  • Australia, Victoria, Glen Iris
  • Posts: 590
Re: Cleaning oil from coolant system W113
« Reply #6 on: November 25, 2016, 05:19:40 »
Thanks for all the info.  There is only one liquid dishwasher soap in Australia that I have found so I'll probable use it.  I will also see what is available in liquid for front loader washing machines.  I'll choose the one with the least suds.  I'll also do a test to make sure the one I choose doses not damage aluminium (I'll pop so aluminium in a solution and leave it over night).
Are there any chemical ingredients to avoid?
I assume I put the cleaner in and drive it for 20min then flush and repeat until it is clean?  Then give it a really good flush.
Should I take the thermostat out when doing all this?
Thanks again ....
Col

1964 230SL
1965 250SE coupe
1993 320CE Sportline