Author Topic: cupholder  (Read 9158 times)

hauser

  • Guest
cupholder
« on: March 08, 2016, 04:34:36 »
I found a cupholder which may or may not work for our cars.  Since my car has been gone now 22 months and counting I am unable to verify measurements.  I have attached a link to the cupholder and would appreciate your input and comments.  Will it work or should I keep looking?

Thanks

http://www.cupholdersplus.com/product/Floor-Console/HR-SHORTY.html

cfm65@me.com

  • Associate Member
  • Gold
  • *****
  • Mossel Bay, South Africa
  • Posts: 730
Re: cupholder
« Reply #1 on: March 25, 2016, 18:49:55 »
Hi Hauser,
Your post has been up for a few weeks and the reluctance of members to comment should give you an idea of the general concensus.
My car is not with me at the moment and therefor cant really give you measurements. However, I think you should take another look at the dimensions of the cup holder. According to the picture, it is nearly a foot square and I really dont know where you were hoping to install it. There is no space between the seats.
Good luck.
Chris
28 Ford Model A Pickup
29 Chevy Phaeton
67 E Type FHC
67 250SL 5 speed
83 911SC
2015 VW T5 California Pop Top

wjsvb ✝︎

  • Associate Member
  • Silver
  • ****
  • USA, VA, Virginia Beach
  • Posts: 255
Re: cupholder
« Reply #2 on: March 26, 2016, 03:28:51 »
Our basic problem is that Europeans, Germans in particular, don't drink anything on the fly.  They stop at an autobahn service area and sip a demitasse in a civilized fashion.  As I recall, my first Euro car that came with a cupholder was a 98 328i; it would hold a tall bold but a Slurpee was out of the question.   The answer, IMHO, is the narrower one that fits between the seats (after the wooden box is removed and carefully stored).  Or not.  Jon
jon

67 250SL early
12 Jeep GC (gone but not missed)
69 300SEL 6.3 Euro project (gone but not forgotten)
81 280SL Euro 4spd

Tyler S

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Encinitas
  • Posts: 1613
Re: cupholder
« Reply #3 on: March 26, 2016, 05:28:28 »
Quote
Our basic problem is that Europeans, Germans in particular, don't drink anything on the fly.
But they sure did smoke on the fly. Have you noticed the cigarette lighter is the easiest accessory to reach in the whole car? You need to reach around the steering wheel to turn on the headlights!
1968 (67) 250sl. 4 speed manual. DB180 Silver
1955 220 Cabriolet A. White Grey
2019 E450 Wagon. Majestic Blue
1936 Ford PU Flathead V8. Creme on tan interior.
1989 Volkswagen T3 Westfailia Campmobile. Dove Grey (blue)

dpreston Virginia

  • Full Member
  • Silver
  • ****
  • USA, VA, Salem
  • Posts: 274
Re: cupholder
« Reply #4 on: March 26, 2016, 15:38:20 »
I added two fold down type cup holders to my center console. Used existing screws and just drilled a hole in the bottom of the cup holder works like a charm.
Used holder like these.
http://m.gearbest.com/car-decorations/pp_13749.html?currency=USD&gclid=Cj0KEQjw5ti3BRD89aDFnb3SxPcBEiQAssnp0mxSWMz8FtOLFQ7wVif3h9XAxCiQe65XovVMW-Qc4ZEaAgfk8P8HAQ
190SL 1960 Sold
280SL 1969
280SE 1969 cabriolet
Vette 67
Porsche 912 67

Jordan

  • Full Member
  • Platinum
  • ******
  • Canada, ON, Jordan
  • Posts: 1422
Re: cupholder
« Reply #5 on: March 26, 2016, 16:40:11 »
Anyone interested in a cup holder that fits inside the tray have a look at this thread. http://www.sl113.org/forums/index.php?topic=17029.msg118541#msg118541  I believe David was the first one, or maybe Michael, to recommend them.  I installed them in my car and they work great.  I used a false bottom for the tray, wrapped in the correct vinyl, so I can remove it if necessary at a show.
Marcus
66 230SL  Euro 4 speed

dpreston Virginia

  • Full Member
  • Silver
  • ****
  • USA, VA, Salem
  • Posts: 274
Re: cupholder
« Reply #6 on: March 28, 2016, 13:04:29 »
Jordan,
I was just getting ready to reference that old post. Thanks.
They continue to work great.
David
190SL 1960 Sold
280SL 1969
280SE 1969 cabriolet
Vette 67
Porsche 912 67

johnnymack

  • Full Member
  • Regular
  • **
  • USA, NH, Meredith
  • Posts: 76
  • 70 280 SL Auto
Re: cupholder
« Reply #7 on: April 03, 2016, 03:02:19 »
I've made one out of mahogany,to match tray , added second one . Will post pics later.
JohnnyMack
70 280 sl auto

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 6971
Re: cupholder
« Reply #8 on: April 04, 2016, 15:44:17 »
Yes, I bought a pair of them, and installed them similar to the photos. The two screws (I don't know if they are original but that's what I have) that hold the tray to the tunnel are used to hold the cup holders in place. I screwed right through the carpet, used the same holes in the tray and tunnel. Very easy install, nice look--and for the naysayers out there they also hold cell phones, sunglasses and other items...which is why I installed two.
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2022 Ford Escape Hybrid
2023 Ford Escape Hybrid

Tyler S

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Encinitas
  • Posts: 1613
Re: cupholder
« Reply #9 on: April 04, 2016, 21:49:18 »
Those are the same type of cup holders used by Volkswagen in the Vanagon and Eurovan. In case someone has trouble finding them.
1968 (67) 250sl. 4 speed manual. DB180 Silver
1955 220 Cabriolet A. White Grey
2019 E450 Wagon. Majestic Blue
1936 Ford PU Flathead V8. Creme on tan interior.
1989 Volkswagen T3 Westfailia Campmobile. Dove Grey (blue)

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 6971
Re: cupholder
« Reply #10 on: April 04, 2016, 22:24:25 »
Those are the same type of cup holders used by Volkswagen in the Vanagon and Eurovan. In case someone has trouble finding them.

Not exactly, Tyler, though they look similar. The ones I have (and are referenced early in the thread) have their cup holding "ring" a full 360, not missing a piece at the leading edge. Also, note the rubber flap to hold the cup in place, which is absent in the photo you posted. Just slight differences, but clearly not the same.
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2022 Ford Escape Hybrid
2023 Ford Escape Hybrid

Tyler S

  • Associate Member
  • Platinum
  • ******
  • USA, CA, Encinitas
  • Posts: 1613
Re: cupholder
« Reply #11 on: April 05, 2016, 00:17:47 »
Michael, The ones for the eurovan are more like Davids photo. Full circle. The ones I posted above are for a vanagon. The fingers are spring loaded to hold the cup instead of a rubber flap. Same Idea just different construction. Reason I posted the photo was for the different colors.
1968 (67) 250sl. 4 speed manual. DB180 Silver
1955 220 Cabriolet A. White Grey
2019 E450 Wagon. Majestic Blue
1936 Ford PU Flathead V8. Creme on tan interior.
1989 Volkswagen T3 Westfailia Campmobile. Dove Grey (blue)

Jordan

  • Full Member
  • Platinum
  • ******
  • Canada, ON, Jordan
  • Posts: 1422
Re: cupholder
« Reply #12 on: April 05, 2016, 11:15:29 »
Those are the same type of cup holders used by Volkswagen in the Vanagon and Eurovan. In case someone has trouble finding them.

Tyler, the ones shown in your picture are, or were, also used in John Deere tractors.
Marcus
66 230SL  Euro 4 speed