Author Topic: Engineering tag placement  (Read 4494 times)

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 564
Engineering tag placement
« on: March 12, 2011, 03:00:28 »
Am I the only one that wonders why several sources including a recent article in The Star show the "oil level" sticker on the trunk (boot) lid? Why not in the engine compartment? Could one example of erronious information keep being perpetuated. Putting this sticker in the trunk seems to defy logic.

I do not have this sticker on my trunk lid and there is no sign of there ever being one. I do have the tire inflation sticker as expected.

Can anyone with an original car or old photo confirm this location?

Gus
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084

hkollan

  • Associate Member
  • Gold
  • *****
  • Spain, Castilla-La Mancha
  • Posts: 519
Re: Engineering tag placement
« Reply #1 on: March 12, 2011, 07:37:20 »
Gus,

To me the placement of these stickers are rather logical in a typical Mercedes way(nothing is coincidal)
These stickers are located in in a place where the person using the car is likely to see it them from time to time.

Hans
Hans K, Cuenca, Spain
1968 280 SL 387 Blue met., parchment leather
1971 280 SL 462 Beige met, Brown leather
1968 280 SL 180 Silver, Red leather
1964 300 SE Lang 040 Black w/Red leather
1985 500 SL 735 Astral Silver w/Black leather
1987 560 SEC 199 Black met., Black leather

Shvegel

  • Associate Member
  • Platinum
  • ******
  • USA, OH, Cleveland Heights
  • Posts: 2978
Re: Engineering tag placement
« Reply #2 on: March 13, 2011, 03:57:15 »
I used to always write timing belt changes and inspection miles on the inside of the trunk lid because the average customer opens the trunk a hundred times more than the hood.

49er

  • Full Member
  • Platinum
  • ******
  • USA, CA, El Dorado Hills
  • Posts: 1412
Re: Engineering tag placement
« Reply #3 on: March 13, 2011, 16:32:19 »
Am I the only one that wonders why several sources including a recent article in The Star show the "oil level" sticker on the trunk (boot) lid? Why not in the engine compartment? Could one example of erronious information keep being perpetuated. Putting this sticker in the trunk seems to defy logic.

I do not have this sticker on my trunk lid and there is no sign of there ever being one. I do have the tire inflation sticker as expected.

Can anyone with an original car or old photo confirm this location?

Gus

No oil level sticker on my trunk/boot lid nor in my engine compartment.

john
1969 280SL 003820
Un Restored, All Original, including the paint
Original Owner, Purchased September 18, 1968
4 speed manual, PS. 77217 miles
7280 miles since awoken from her 20+ yr "nap" in 2010

69280sl

  • Full Member
  • Gold
  • *****
  • USA, IL, Elk Grove
  • Posts: 564
Re: Engineering tag placement
« Reply #4 on: March 13, 2011, 18:47:23 »
Thanks John.
Since you have owned your car since new, that satisfies me that these tags were probably not on the trunk lid from the factory. At least not for 68 and 69 pagodas.

Gus
Gus

68 280sl, signal red/ beige/black softtop. Car # 1084

badali

  • Full Member
  • Platinum
  • ******
  • USA, Pa, Butler
  • Posts: 1017
  • 1966 230SL
Re: Engineering tag placement
« Reply #5 on: March 13, 2011, 23:21:18 »
Where would they be located in a 66 230 SL?  I don't see one in my car.  The tire pressure one is on the center of the trunk lid.
Brad

1961 220 Sb
1966 230 SL
2019 E 450 4 Matic
2022 GLC 300 4 Matic