Main.TrailIndexPage | Chassis and Body | ChassisBody.Hood | Hood Cable Removal

Hood Cable Removal

1. Start by loosening the 2 nuts that stabilize the cable to the mount just outside of the tower

2. Lift the cable off the mount and unclip it along its path to the firewall so you have some slack

3. Then remove the 4 screws holding the assembly to the tower and pull it out to where you can get at the pin. The pin is part of an clip that attaches to the cable

4. Push off the clip and the pin will slide right out with it.


< ChassisBody.Hood | Main.TrailIndexPage | ChassisBody.Firewall >