« previous next »
Pages: [1]

Author Topic: Trunk and door seals  (Read 598 times)

bconley759

  • Full Member
  • Junior Level
  • USA, FL, Lake Placid
  • Posts: 5
Trunk and door seals
« on: August 01, 2025, 13:31:48 »
So putting my 66 230sl back together and need a good glue to put all the seals back in, any suggestions??
« Last Edit: August 01, 2025, 13:36:54 by bconley759 »
Logged

lowpad

  • Full Member
  • Senior
  • ***
  • USA, CT, New Preston
  • Posts: 233
Re: Trunk and door seals
« Reply #1 on: August 01, 2025, 14:28:31 »
I've used both the "official" Mercedes glue (https://www.pelicanparts.com/More_Info/000989927109.htm?pn=000-989-92-71-09-MBZ&gad_source=1&gad_campaignid=22208005429&gbraid=0AAAAAD_tz52sUsBeWbFCIe3Sam2vXV_8q&gclid=CjwKCAjwy7HEBhBJEiwA5hQNopnoPPQcTzQyLvCi4NFflMDkgogzie1CNMncjw-XRyYlFCOjrpeVZBoCV-kQAvD_BwE) as well as traditional 3M weatherstrip glue (https://www.3m.com/3M/en_US/p/d/b40069430/). Haven't found a big difference between them. It's really important to follow directions (ie, apply to both sides and really wait until it's tacky). Rushing it results in a poor bond.
Logged
1966 230SL (6/66 build)
French export
4-speed manual
158 Exterior / 040 Hardtop
2001 SLK230
1996 Porsche 993
1991 Acura NSX
Pages: [1]
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17