Author Topic: How much yardage of MBtex for bottom of hardtop?  (Read 3965 times)

rutger kohler

  • Guest
How much yardage of MBtex for bottom of hardtop?
« on: October 28, 2013, 02:15:45 »
Hi, my bamboo MBtex around the bottom of my 280SL hardtop is looking tired, as are the edges of the MBtex on my soft top cover lid.  Does anyone have a good idea of how much replacement MBtex I should order plse? I see Budsbenzs supply it by the yard at 60" wide.

rutger kohler

  • Guest
Re: How much yardage of MBtex for bottom of hardtop?
« Reply #1 on: November 09, 2013, 22:21:55 »
The answer is one yard accoding to David Latham of Budsbenz.  I am going ahead with this.

Benz Dr.

  • Associate Member
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7272
  • Benz Dr.
Re: How much yardage of MBtex for bottom of hardtop?
« Reply #2 on: November 11, 2013, 18:04:06 »
You can buy the material for the hatch cover already pre cut.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn
1966 230SL 5 speed
1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1990 560SEC

gvillayandre

  • Guest
Re: How much yardage of MBtex for bottom of hardtop?
« Reply #3 on: November 14, 2013, 15:31:48 »
Hi,

I will need to do this change also.

Any instructions about to remove and replacement of this tex?

I don't see any screw or bolt to remove this part.

Thanks in advance

rutger kohler

  • Guest
Re: How much yardage of MBtex for bottom of hardtop?
« Reply #4 on: November 15, 2013, 07:54:07 »
Hi, thanks for the pre-cut tip however as I will have plenty left over from the underrside of the hardtop I figure it should be easy to cut myself,  The exisiting MBtex on the soft top hatch lid is good enough to provide a pattern.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17