« previous next »
Pages: [1]

Author Topic: Color wheel rim  (Read 2858 times)

marco1962

  • Guest
Color wheel rim
« on: April 19, 2009, 13:53:27 »
Good morning to all.
Let me know if there is a specific color code as used for painting the interior of the channel and the rear wheel rim - first series - (230-250 SL)
The gray-green color used by the factory (SUDRAD) where it was applied after the color of the body on the outside.
Type of rim: 113 400 01 06 (SUDRAD Code: 14005M) - Rim with the three pins for the small hubcap.
Thanks to all.
Logged

Peter van Es

  • Honorary Member
  • Platinum
  • ******
  • Netherlands, North Holland, Nederhorst Den Berg
  • Posts: 4001
Re: Color wheel rim
« Reply #1 on: April 19, 2009, 14:05:57 »
There is something on this halfway down the page on this page from the Technical Manual http://www.sl113.org/wiki/WheelsTires/Rims but I don't know if it answers your questions.

Peter
Logged
1970 280SL. System Admin of the site. Please do not mail or PM me questions on Pagoda's... I'm not likely to know the answer.  Please post on the forum instead!

marco1962

  • Guest
Re: Color wheel rim
« Reply #2 on: April 19, 2009, 14:18:04 »
Hi, yes i read this chapter:

- "230SL - 280 SL early had the visible outer surface of the rims always painted in body color. The rest of the rim is/was painted with a grayish primer, not with body paint"

my question concerns the color "grayish primer"  (?)

I have to restore these wheel rims and I do not know the shades of color.  Thanks a lot for your help. Marco
Logged
Pages: [1]
« previous next »