Author Topic: 230SL IP parts  (Read 2043 times)

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7128
  • Benz Dr.
230SL IP parts
« on: January 10, 2020, 05:47:02 »
I'm looking for the warm running device that sits on top of a 230SL injection pump. I need the base, slide valve, and metal tube with two pipes for coolant hoses. I can get the thermostat but I will take a used one that works. Heat it up and as long as the pin move .050'' it's OK.

I need enough parts to do two different pumps but I could make one work with just the internal slide valve and the metal tube on top for one pump. The other pump needs everything.   
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5154
Re: 230SL IP parts
« Reply #1 on: January 10, 2020, 08:01:54 »
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7128
  • Benz Dr.
Re: 230SL IP parts
« Reply #2 on: January 10, 2020, 17:35:17 »
Thanks,
that only covers the tube with pipes that holds the thermostat. It's a start though.

I would still need a slide valve.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC