« previous next »
Pages: [1]

Author Topic: gear lever bushes pb !  (Read 965 times)

yves

  • Full Member
  • Silver
  • ****
  • France, Poitou-Charentes, LA ROCHELLE
  • Posts: 346
  • Happy owner of a 69/ 280 sl , 63 Etype ,55 XK 140
gear lever bushes pb !
« on: June 13, 2021, 14:02:57 »
 I am replacing the gear lever bushes plastic and rubber  with the SLS kit but it seems that i have some 2 white plastic bushes more than neccessary...!
Are they for another car ( 230 or 250 ?) in case ?
On the pic below  i have fitted the N° 1 but the bushes N° 2 are unemployed ?
Logged
Happy owner of a 69 blue 280SL ,  63 FHC  osb E-type , 55 FHC XK 140 to be restored...

ja17

  • Full Member
  • Platinum
  • ******
  • USA, OH, Blacklick
  • Posts: 7313
Re: gear lever bushes pb !
« Reply #1 on: June 13, 2021, 14:11:49 »
Some models used bushings on both end of the two support rods. Those look like the ones that are at the end of the support rod, where it connects to the plate near the base of the shifter rod.
Logged
Joe Alexander
Blacklick, Ohio
1969 Dark Olive 280SL
2002 ML55 AMG (tow vehicle)
2002 SLK32 AMG (350 hp)
1982 300TD Wagon turbo 4spd.
1963 404 Mercedes Unimog (Swedish Army)
1989 flu419 Mercedes Unimog (US Army)
1998 E430
1974 450SLC Rally
1965 220SE Finback

Pawel66

  • Full Member
  • Platinum
  • ******
  • Poland, Mazowieckie, Konstancin-Jeziorna
  • Posts: 5183
Re: gear lever bushes pb !
« Reply #2 on: June 13, 2021, 14:28:23 »
Logged
Pawel

280SL 1970 automatic 180G Silver
W128 220SE
W121 190SL
G-class

yves

  • Full Member
  • Silver
  • ****
  • France, Poitou-Charentes, LA ROCHELLE
  • Posts: 346
  • Happy owner of a 69/ 280 sl , 63 Etype ,55 XK 140
Re: gear lever bushes pb !
« Reply #3 on: June 13, 2021, 18:57:42 »
Y're right...i am so stupid ..... ::) they are on the plate where the rods are fixed ....!
The plate was on the bench but my eyes were in the car  :o
Thank's both of you  ;)
Logged
Happy owner of a 69 blue 280SL ,  63 FHC  osb E-type , 55 FHC XK 140 to be restored...

yves

  • Full Member
  • Silver
  • ****
  • France, Poitou-Charentes, LA ROCHELLE
  • Posts: 346
  • Happy owner of a 69/ 280 sl , 63 Etype ,55 XK 140
Re: gear lever bushes pb !
« Reply #4 on: June 14, 2021, 11:24:56 »
I have fitted now all the bushes but warning about the thickness of the two white big one which go at the front end of the shaft :
They are 1 mm too thick ( each one...!) and can't be fitted with the fork outside :
( kit from SLS i have called them for modification of the kit )
SEE above:
Logged
Happy owner of a 69 blue 280SL ,  63 FHC  osb E-type , 55 FHC XK 140 to be restored...
Pages: [1]
« previous next »