W113 Pagoda SL Group > Drive train, fuel, suspension, steering & brakes
Clutch pedal
(1/1)
450sl:
Hi All,
Wanted to change my clutchslave cilinder and adjust my 280-70 pedal.
Seems my clutchpedal rests approx 15mm or 1/2'' higher than my brakepedal .
Can anyone confirm that this is normal? any comments?
Thanks
Mark
Naj ✝︎:
Hi, Mark,
They sit level on my car
naj
waltklatt:
Mark,
There should be an adjustable bolt at the junction of the clutch pedal and clutch master.
Check that out, it's not a straight bolt, but an offset type.
You will find a similar one for the brake pedal too.
How does the brake pedal sit in relation to the gas pedal?
Walter
450sl:
Thanks Naj and Walt, for your kind reply.
Naj , i already suspected taht pedals should be even.
Walter , i found this adjustmentbolt nr 20 , but for the required 0.2mm clearance i am at the very end of its range.
Since i can feel no excessive play on the clutchpedal pivotpoints , i suspect rubber stop no 24 .
Or has someone a better idea?
Does anyone have the partnr of this rubberstop?
Mark
Navigation
[0] Message Index
Go to full version