Author Topic: New 6-speed transmission for W113  (Read 31824 times)

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4708
New 6-speed transmission for W113
« on: December 17, 2015, 07:09:11 »
I chatted with Karl Middelhauve this afternoon about his latest projects : http://www.mbgrand600.com/
Those of you who want to shift a lot  ;) or prefer a quieter car at higher speeds might want to contact him.
He is importing a few 6-speed trannies from Poland at a very reasonable price - much less than a new ZF 5-speed or most current Getrag 5-speed conversion (excluding shipping and customs).
The company makes different versions for a variety of MB models (W113, R107) including conversions for cars with automatic transmissions.
« Last Edit: December 17, 2015, 17:42:01 by 66andBlue »
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

GGR

  • Associate Member
  • Platinum
  • ******
  • USA, DC, Washington
  • Posts: 1470
Re: New 6-speed transmission for W113
« Reply #1 on: December 17, 2015, 09:26:24 »
In the first picture, the bellhousing is a v8 one and the engine behind looks to be an M117 out of a euro w126 car, judging by the exhaust manifolds. Does he also sell a set up for MB v8 engines?

Jonny B

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, CA, San Marcos
  • Posts: 4104
Re: New 6-speed transmission for W113
« Reply #2 on: December 17, 2015, 13:31:25 »
I saw a listing sent from my friend and mechanic at Silver Star MB. That listing indicated transmissions for 107/108/109
Jonny B
1967 250 SL Auto, DB 568
1970 280 SL Auto, DB 904
1966 Morris Mini Minor

waltklatt

  • Associate Member
  • Platinum
  • ******
  • USA
  • Posts: 1129
Re: New 6-speed transmission for W113
« Reply #3 on: December 17, 2015, 17:17:51 »
Most intrigued by the new 6 speeders.

How does one retrofit the gearshift lever?
Does this kit retain the original gearshift, or does one have to fit one from a later MB?

I had to retrofit my 4 speed gearshift (W113) to match the W201 gearshift box.

Walter

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4708
Re: New 6-speed transmission for W113
« Reply #4 on: December 17, 2015, 17:40:55 »
Here is a bit more information. They are sold by a German company "S&SG Getriebe", made in their Polish factory, and based on Getrag transmissions.
Expect a price of EUR 4.7K including shipping but w/o import duty.

Gear             Orig.4-            ZF5-               S&SG 6-Gang
1                     4,05                 3,83                 4,002
2                      2,23                 2,20                 2,108
3                      1,40                 1,40                 1,380
4                      1,00                 1,00                 1,000
5 +                                          0,81                 0,780
6 ++                                                               0,645

Speedo connection (mechanical) is unchanged, for MPH or KMH.

Walt, I do not know whether the kit comes with a new shifter.

GGR, yes the company lists conversions for V8 M116/117 engines. Call Karl for more info.

Jon, we have the same information. I am considering buying one for the red 230SL  ;)
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4708
Re: New 6-speed transmission for W113
« Reply #5 on: December 17, 2015, 23:49:53 »
See my reply #4, line 2!
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Jowe

  • Full Member
  • Silver
  • ****
  • Sweden, Västra Götaland, Gothenburg
  • Posts: 273
Re: New 6-speed transmission for W113
« Reply #6 on: December 18, 2015, 05:50:54 »
This is the one, I guess:
http://oldtimer-ersatzteile24.de/6-Gang-Getriebe-fuer-Mercedes-230SL-W113-Pagode or
http://oldtimer-ersatzteile24.de/6-Gang-Getriebe-fuer-Mercedes-250SL-280SL-W113

With shifter and knob of color of choice.
N.B. Price incl. VAT for EU customers.
Johan
04/1964 230SL, European, manual 4-sp, power steering, 050/050 white, black leather, Blaupunkt (SOLD)

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2795
    • http://www.colinferns.com
Re: New 6-speed transmission for W113
« Reply #7 on: December 18, 2015, 11:38:37 »
I'd be interested to see a road test report.
The getrag 5 speed conversions give a 5th gear ratio of 0.89 and you really need to be doing at least 50 mph before it's useable (but very nice from then on).
This 6 speed of 0.645 is going to be a very tall gear indeed for these cars and I wouldn't be surprised if it ended up encouraging much higher cruising speed that the rest of the car should be expected to safely accommodate.

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7122
  • Benz Dr.
Re: New 6-speed transmission for W113
« Reply #8 on: December 18, 2015, 15:43:58 »
I'd be interested to see a road test report.
The getrag 5 speed conversions give a 5th gear ratio of 0.89 and you really need to be doing at least 50 mph before it's useable (but very nice from then on).
This 6 speed of 0.645 is going to be a very tall gear indeed for these cars and I wouldn't be surprised if it ended up encouraging much higher cruising speed that the rest of the car should be expected to safely accommodate.

I tend to agree. Our car's engines are designed to run at high ( or higher) RPM's than modern engines. Running at 70 MPH at 2,800 RPM ( I'm guessing here ) may be lugging the engine more than you really want or need.
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

mdsalemi

  • Pagoda SL Board
  • Platinum
  • ******
  • USA, NC, Davidson
  • Posts: 6651
Re: New 6-speed transmission for W113
« Reply #9 on: December 18, 2015, 17:35:21 »
I tend to agree. Our car's engines are designed to run at high ( or higher) RPM's than modern engines.

I have the original engine, auto transmission, and rear axle as delivered. However, Dan, you know that this screams--about 4,000 RPM at today's highway speeds. This bothers a lot of people and there's no end to solutions to something that is characteristic, (not a problem) including new/different rear axles; engine swaps, and new/different transmissions with varying overdrive gearing.
Michael Salemi
Davidson, North Carolina (Charlotte Area) USA
1969 280SL (USA-Spec)
Signal Red 568G w/Black Leather (Restored)
2023 Ford Maverick Lariat Hybrid "Area 51"
2022 Ford Escape Hybrid
2023 Ford Escape Hybrid

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7122
  • Benz Dr.
Re: New 6-speed transmission for W113
« Reply #10 on: December 18, 2015, 19:45:07 »
I have the original engine, auto transmission, and rear axle as delivered. However, Dan, you know that this screams--about 4,000 RPM at today's highway speeds. This bothers a lot of people and there's no end to solutions to something that is characteristic, (not a problem) including new/different rear axles; engine swaps, and new/different transmissions with varying overdrive gearing.

I understand that. A final gear ratio of about 3.46 is just about ideal for our cars. One of the things to consider is torque band and 2,500 RPM or lower is out of that range for our engines. What stick is saying is that you would need to drive about 80 MPH to obtain a decent RPM range in sixth gear to be operating in the torque band and that wouldn't be possible for a large portion of pagoda owners. If you lived in Texas or Arizona where you can drive those speeds all day long on the Interstate, then it could be OK for you.
Here in Ontario, you can loose your car and your license for driving 30 MPH over the speed limit of 50 MPH that's posted on most roadways.   
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

Rolf-Dieter ✝︎

  • Platinum
  • ******
  • Canada, ON, London
  • Posts: 3683
    • Best Pagoda Site second to none!
Re: New 6-speed transmission for W113
« Reply #11 on: December 18, 2015, 19:50:00 »
Just like Mike my car has the original engine, auto transmission, and rear axle as delivered. I like it that way and have no plans to change anything. On the expressway I cruse around 3200 to 3400 RPM (very seldom do I see higher RPM unless I am overtaking another car). I do have my hardtop on the car (more now then before), this also muffles the noice quite a bit. I enjoy the car this way when I drive her, if I want to go faster I use my DD :)

I have to admit I lost hearing on my right ear (some quack of a doctor many years back poked a hole in my right eardrum and hearing detiriorated as the years went on, perhaps that is why the engine noise does not bother me that much).

From an engineering point of view I like to add that adding something that new (like a new transmission and driving at higher speeds) will eventually break other components on a car that was designed and manufactured some 45 to 50 years ago. Having said that and for that reason "I'm out" (as the Multi Millionaire's saying goes on the TV show DRAGON DEN) ~grin~
« Last Edit: December 18, 2015, 19:55:29 by Rolf-Dieter »
DD 2011 SL 63 AMG and my 69 Pagoda 280 SL

66andBlue

  • Full Member
  • Platinum
  • ******
  • USA, CA, Solana Beach
  • Posts: 4708
Re: New 6-speed transmission for W113
« Reply #12 on: December 18, 2015, 20:29:23 »
... If you lived in Texas or Arizona where you can drive those speeds all day long on the Interstate, then it could be OK for you.
Here in Ontario, you can loose your car and your license for driving 30 MPH over the speed limit of 50 MPH that's posted on most roadways.  
Right on the spot, Doctor!
Here is are some data showing what ideal Texas or Nevada or German Autobahn driving would give you with this transmission (converted from a table posted by B. Scheiter on the Pagodentreff web site).

Engine RPM at different car speeds (Tire: 185/80/14; 4.08 rear axle)

RPM at 62mph (100 km/h) in 2.Gear = 7276 Rev/min
RPM at 62mph (100 km/h) in 3.Gear = 4763 Rev/min
RPM at 62mph (100 km/h) in 4.Gear = 3452 Rev/min
RPM at 62mph (100 km/h) in 5.Gear = 2692 Rev/min
RPM at 62mph (100 km/h) in 6.Gear = 2226 Rev/min

RPM at 93 mph (150 km/h) in 3.Gear = 7145 Rev/min
RPM at 93 mph (150 km/h) in 4.Gear = 5178 Rev/min
RPM at 93 mph (150 km/h) in 5.Gear = 4039 Rev/min
RPM at 93 mph (150 km/h) in 6.Gear = 3340 Rev/min
« Last Edit: December 18, 2015, 20:36:06 by 66andBlue »
Alfred
1964 230SL manual 4-speed 568H signal red
1966 230SL automatic 334G light blue (sold)
1968 280SL automatic (now 904G midnight blue)

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7122
  • Benz Dr.
Re: New 6-speed transmission for W113
« Reply #13 on: December 18, 2015, 22:49:12 »
4.08 is the lowest axle ratio you could get when our cars were new. It would be even lower with a 3.69 or even the common 3.92  A five speed makes a lot of sense but I'm just not convinced that a 6 speed is warranted. 
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

tel76

  • Associate Member
  • Gold
  • *****
  • United Kingdom, Isle of Man, Douglas
  • Posts: 835
Re: New 6-speed transmission for W113
« Reply #14 on: December 19, 2015, 09:19:59 »
Can you please explain how a 3.69 ratio or a 3.92 ratio is lower than a 4.08 ratio? I was always taught that the higher the number the lower the ratio.
« Last Edit: December 20, 2015, 08:29:58 by tel76 »
Eric

GGR

  • Associate Member
  • Platinum
  • ******
  • USA, DC, Washington
  • Posts: 1470
Re: New 6-speed transmission for W113
« Reply #15 on: December 19, 2015, 12:15:29 »
3.69 or 4.08 are already ratios, number of teeth on the crown / number of teeth on the pinion. The higher the number, the slower you go for a given rpm. I'm always a bit lost with the English terminology. In French lower numbers are said to be "long" ratios because the car "pulls long", of goes a longer distance for a given number of engine rotations. A higher number is said to be a "short" ratio, an the car "pulls short". In short, long is low and short is high, and there is a wide difference between the two  ::).

stickandrudderman

  • Vendor
  • Platinum
  • ******
  • United Kingdom, England, Richmond
  • Posts: 2795
    • http://www.colinferns.com
Re: New 6-speed transmission for W113
« Reply #16 on: December 19, 2015, 15:25:20 »
Quote
Can you please explain how a 3.69 or a 3.92 is lower than a 4.08?


Well, if you insist.
A smaller number deducted from a larger number results in a positive number so:
4.08-3.96=0.39.
Therefore 3.96 can be said to be a lower number than 4.08

Quote
I was always taught that the higher the number the lower the ratio

Which is correct.

Glad you asked? ;D

GGR

  • Associate Member
  • Platinum
  • ******
  • USA, DC, Washington
  • Posts: 1470
Re: New 6-speed transmission for W113
« Reply #17 on: December 19, 2015, 15:40:58 »
What about the higher the ratio, the lower the gear?  ???

Benz Dr.

  • Vendor
  • Platinum
  • ******
  • Canada, ON, Port Lambton
  • Posts: 7122
  • Benz Dr.
Re: New 6-speed transmission for W113
« Reply #18 on: December 20, 2015, 01:46:24 »
This gets confused all of the time. By lower, I meant lower engine RPM. Low gearing as in 4.08 will give you higher engine RPM, of course. As long as we all understand each other regardless of how it's stated. :)
1966 230SL 5 speed, LSD, header pipes, 300SE distributor, ported, polished and balanced, AKA  ''The Red Rocket ''
Dan Caron's SL Barn

1970  3.5 Coupe
1961  190SL
1985   300CD  Turbo Coupe
1981  300SD
2013  GMC  Sierra
1965  230SL
1967 250SL
1970 280SL
1988 560SEC

GGR

  • Associate Member
  • Platinum
  • ******
  • USA, DC, Washington
  • Posts: 1470
Re: New 6-speed transmission for W113
« Reply #19 on: December 20, 2015, 02:33:38 »

Ah, so low is high and vice versa. I knew I had missed something!


Scottcorvette

  • Full Member
  • Gold
  • *****
  • United Kingdom, England, Norfolk
  • Posts: 603
Re: New 6-speed transmission for W113
« Reply #20 on: December 20, 2015, 07:05:32 »
We fitted a 6 speed into an early Corvette several years ago and it was just too much, the ratios were so short that you were constantly changing gear, and you didn't get into 6th until you were doing a considerable speed, certainly faster than you would really want to be driving. The owner wound up putting a 4.11 rear end in which improved things so I'm told, I'll bet it would still want to be a higher ratio than that though to make it really usable.

The 5 speed is a much nicer conversion in a Corvette, and I have just fitted a T5 5 speed into my Mustang, that has a 0.63 5th gear and a 3.70 rear end which is a nice combination, you can get into 5th at normal sort of cruising speed without labouring.

It would be good if someone came up with a conversion for our cars using a T5 or a Tremec TKO transmission as they are widely available and not crazy money. Seems the Getrag is getting a bit thin the ground now.

hauser

  • Guest
Re: New 6-speed transmission for W113
« Reply #21 on: December 20, 2015, 08:06:19 »
Ray Hays went with a Tremec on his '69!  He's very happy with it.  Buds Benz does this very same conversion as well.

Raymond

  • Platinum
  • ******
  • USA, FL, JACKSONVILLE
  • Posts: 1197
    • GemstoneMediaInc.com
Re: New 6-speed transmission for W113
« Reply #22 on: December 22, 2015, 23:45:39 »
Scott, I put  a T-5 in my '68 with the 4.08 differential.   The TKO transmission will not fit the tunnel.  I also carefully chose the ratios for each gear so that 1st is taller/longer than the factory G72, 2nd is only a bit higher, 3rd and 4th are dead on, so that the car has very similar driving characteristics as factory up through 4th.  I chose 5th gear at 0.72 to keep it in the torque range.  I can use 5th over 40 MPH.  At 3000 RPM, I'm doing 76.  That's very comfortable, doesn't attract the attention of the constabulary.  On the recent 800 or so mile run to PUB and then back, I got 22+ MPG with air con on.  

The T-5 was available in about 20 different gear combinations and three shifter positions.  Bud's improved on my installation and uses the SL's shifter.  What you need to do is find your own T-5 and let them rebuild it.  They can tell you which model numbers work best.  

So that no one wonders, I don't get anything out of this recommendation I'm only commenting on my experience.
« Last Edit: December 28, 2015, 01:12:49 by Raymond »
Ray
'68 280SL 5-spd "California" Coupe

Scottcorvette

  • Full Member
  • Gold
  • *****
  • United Kingdom, England, Norfolk
  • Posts: 603
Re: New 6-speed transmission for W113
« Reply #23 on: December 23, 2015, 07:59:23 »
Thanks Ray, that is interesting. I have already bought a used Getrag which is currently being rebuilt, had I not found that and had known about the T5 conversion I maybe would have gone that route. I have already spent more on the used Getrag than a new T5 would have cost.

I didn't think the Tremec would fit, it is quite a big unit. My only criticism of the Tremec TKO600 transmissions we have fitted is that 1st gear is very short, in all the cars we have fitted them in you are out of first gear very quickly so moving traffic can be a pain, my Corvette has a Borg Warner T10 4 speed in it and that has a real long first gear and I think a 3.08 rear end, you can do around 40 in first! Makes town driving real easy, and that is the main reason why I wouldn't put a 5 speed in that car. I don't really do any long journeys in it and I really like the long first gear, not only that there is so much buffeting at anything over 60mph that you generally don't go faster than that.

I can't comment on the T5 as I have only done around 60 miles in it in the summer and can't really remember what it was like, I haven't checked the ratios but but I seem to remember it feels like it has a longer first. I can't remember what the Mercedes first gear was like as I only drove it once up the lane, I think that was a reasonably short first gear though.


Raymond

  • Platinum
  • ******
  • USA, FL, JACKSONVILLE
  • Posts: 1197
    • GemstoneMediaInc.com
Re: New 6-speed transmission for W113
« Reply #24 on: December 28, 2015, 01:12:02 »
First gear on the G72 is 4.05.  The T-5 I chose has a 1st gear of 3.76.  It is still quite low but is a noticeable improvement over the original parade gear.  While I'm at it, the other G-72 gears are 2.18, 1.40, and 1.00.
My T5-(model 234) is 2.18, 1.42, 1.00, 0.72  Reverse in the G72 is 3.58 and 3.76 in the T-5. 
Ray
'68 280SL 5-spd "California" Coupe

TheEngineer

  • Associate Member
  • Gold
  • *****
  • USA, West Seattle, WA
  • Posts: 775
  • '69 280SL,Signal Red,
Re: New 6-speed transmission for W113
« Reply #25 on: March 01, 2017, 00:31:02 »
I have the original engine, auto transmission, and rear axle as delivered. However, Dan, you know that this screams--about 4,000 RPM at today's highway speeds. This bothers a lot of people and there's no end to solutions to something that is characteristic, (not a problem) including new/different rear axles; engine swaps, and new/different transmissions with varying overdrive gearing.
I installed a 3.27 rear axle years ago and I am very Happy Happy Happy! About 3100 rpm at 62 MPH and still plenty of power going up-hill! My car has an A/T.
'69 280SL,Signal Red, 09 cam, License BB-59U
'67 230SL, 113042-10-017463 (sld)
'50 Jaguar Roadster XK120, #670.318 (sld)
tired engineer, West-Seattle,WA

Jimbo1907

  • Guest
Re: New 6-speed transmission for W113
« Reply #26 on: March 16, 2017, 15:40:07 »
Looking at the ratios for the six speed, it looks like first is too short, and second too long.

I think the ideal changeover setup in 113 manual cars is to fit a dog-leg Getrag box, with the 1:1 fifth, and then change the rear axle to a 3.27 or 3.46. But dog-leg Getrags are very hard to find, and expensive when you can track one down (and the only one I found had a cracked case and we sent it back) so I opted for a standard non-dog-leg box with the OD fifth, and we reinstalled the original rear axle with its 3.92 ring and pinion,or 4.08, whatever it is.

PagodaMafia

  • Guest
Re: New 6-speed transmission for W113
« Reply #27 on: March 18, 2017, 11:18:50 »
Hi all, i have been running Siegfrieds gearbox in my car (1968) euro-spec 280SL for around 1 month now and it has been wonderful. bolted straight in.. dont agree that 1st is too short and and 2nd is to long..anyway each to their own. The extra torque really improves the acceleration from standing etc and no heat loss. It powers up hills at in top gear just wonderful as i can now hear the engine instead of the gearbox whine. Fundamentally the gearbox like the one i purchase has the period correct bell housing etc so it looks pretty stock when the car in on the hoist   if you choose an older box there is no way you get the sort of power delivery and stock look that this kit provides. A beautiful piece of engineering.

PIP1947

  • Inactive
  • Regular
  • **
  • Australia, New South Wales, Darling Point
  • Posts: 76
Re: New 6-speed transmission for W113
« Reply #28 on: March 26, 2017, 13:54:55 »
Hi Pagoda Mafia. This is interesting. You appear to have converted your car from auto to manual transmission, in the course of installing the 6 speed gearbox. Was installation of a clutch pedal, master cylinder, etc a big deal and can you give me an idea of the cost of the approximate cost of the change over.
Regards
Pip 1947
Sydney

PagodaMafia

  • Guest
Re: New 6-speed transmission for W113
« Reply #29 on: June 07, 2017, 12:42:19 »
Hi Pip1947 sorry about the late reply been travelling for some months now back in Australia. If you wanted to check it out email me on damoalucas@gmail.com if like so you can take a look. The install cost was pretty small but the cost of gear box landed is around 9.5 k.. in includes the entire kit pedals etc etc. Alex , his son and father are the best in town from http://www.silverstarservice.com.au/silverstar_contactus.html. They installed it no fuss.

Let me know if you need more picks

BRYANH815

  • Full Member
  • Junior Level
  • *
  • USA, IL, Barrington Hills
  • Posts: 38
Re: New 6-speed transmission for W113
« Reply #30 on: June 08, 2017, 01:34:08 »
I too converted a 1956 Corvette with a 4.11 rear end 3 speed to a Tremec 5 speed. This made driving the car a pleasure.  The car used to run at 4000 rpm at 55-60 mph  upon conversion this was bumped up by 1/3. The data above does suggest that the 6 speed would be too much for the engine ..lugging . A 5 SPEED MANUAL or 5 Speed Auto would be better. Bryan Hepper Barrington Hills ill. 1970 280 SL 1965 Stingray
Bryan E. Hepper Sr.

Jimbo1907

  • Guest
Re: New 6-speed transmission for W113
« Reply #31 on: June 15, 2017, 11:57:44 »
The Tremec is a terrific transmission; lots of available ratios, and very precise shifting with short throws, etc. I have a TKO600 in my Kirkham Cobra and I love it. Very cool that you have a 56 Vette- best looking car they ever built, IMHO.