Pagoda SL Group
W113 Pagoda SL Group => Commercial Advertising => Topic started by: lpeterssen on May 05, 2023, 12:43:56
-
Dear friends
Just finished another wiring harness. This one was complex to restore and took me three (3) weeks to complete.
W109-6.3’s are a beast, and also it’s wiring harness, very complex with many many accessories and the best of the best in electrical logic.
Limited production cars for which it can not be sourced new wiring harnesses. Remember around 5,500 cars of this type were made.
This MINT set includes the following sub harnesses:
1. Main harness
2. Rear harness
3. Engine control harness (totally new, I built it from scratch)
4. Air conditioning wiring harness (also new, built from scratch)
5. Sunroof harness
6. Rear windshield defroster
The only harness which is not included is the power windows harness, but I may rebuilt yours or tell you which other ones are compatible.
The asking price, well justified after 120 hours of work and many materials is 5,950$ plus shipping. Can ship worldwide.
Here an album with all the photos.
https://www.icloud.com/sharedalbum/#B0Q5ZBCwPv4lY4
Best regards
L.peterssen
-
More photos….
-
Didn’t mention the specs of the car this harness came from:
1. LHD
2. AUTOMATIC transmission as all 6.3
3. SUNROOF
4. POWER WINDOWS
5. REAR WINDSHIELD DEFROSTER
6. FACTORY A/c
7. FOG LAMPS
8. PNEUMATIC SUSPENSION (as all w109)
9. DELAYED CABIN LIGHT TURN OFF
10. EURO SPEC for headlights
I bought the used harness prior to fully restoring it from a German Mercedes parts recycling guy.
Regards to you all and please pass the word about this harness to your MB colleagues.
-
I have a 6.3 parts car. Wire harness is intact. 6,500 produced.
-
Excellent. This harness also was in really good shape, but it requires always love and to replace the T30 lines minimum since those do not resist 50 years.