Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: OysterSlayer on October 25, 2022, 02:48:23
-
Hello, I'm new to this group and I am trying to replace a broken heater flap on my 70 280sl. I purchased a new flap but can't get the bracket loose to install the new flap. You can see the bracket and what looks like a nut in the photo but It isn't. How do I loosen this bracket to install the new valve or am I going about it the wrong way?
-
Hello, I'm new to this group and I am trying to replace a broken heater flap on my 70 280sl. I purchased a new flap but can't get the bracket loose to install the new flap. You can see the bracket and what looks like a nut in the photo but It isn't. How do I loosen this bracket to install the new valve or am I going about it the wrong way?
See photo:
-
Sead the top nut is welded onto the bracket, you can only turn the bolt from underneath. I suggest put some lubricant on it from above and leave it a while then try to remove the nut from underneath. Its a tight fit but doable.
Rgds, Joe
-
Thanks for your reply. I tried penetrating lubricant and heat but in the end had to carefully grind it off.
-
no probs - the grinder wins in the end ;)