Pagoda SL Group
W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Pagodatastic on June 23, 2022, 17:24:22
-
Dear all,
I have just sourced a replacement heater/blower motor and a re-conditioned heater core.
Before I start work to replace them both any advice would be gratefully received.
Thanks so much
Best
Steve
SL280
-
Steve,
someone here said that the car is build around the heater, which is probably true.
You will have to remove a lot of components in and around the dash to get to it.
-
Hi,
everything you need to know you can find here:
https://www.w113.eu/geschlossen/Reparaturen/Pagode%20Bedienscheiben%20Luefter%20Luefterrad%20ausbauen.html.
I did it a few weeks ago, a real imposition.
I also replaced the sintered bearings of the blower motor with ball bearings, which is a significant improvement.
It is also worth removing the heat exchanger and cleaning it inside and out.
...WRe