Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Pastarnac on June 10, 2022, 01:10:42
-
I removed the bracket #40 and I have it on the bench.
I have a hard time removing the c clip # 31 so I can replace the bushing. It is located in a channel and I have a hard time gripping it in any way to get it out.
Any technique or special tool that I should employ?
-
After scratching my head and under the assumption that these were smart engineers I got the answer…
No tool required.
The c clip does not has to come out; just push the bushing and the clip gives in by entering into the groove. With sufficient push force the bushing just comes out…