Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Brennie on September 29, 2021, 12:41:36

Title: Hand brake questions
Post by: Brennie on September 29, 2021, 12:41:36

Having just refurbished my hand brake..I have two questions…
In the picture,I’m guessing that there should be something to stop the spring dropping all the wat through..some kind of collar…it’s not inside ,therefore I can only conclude it was lost at the chromers ..can it be replaced or a substitute used?

Secondly.. I found this rubber u shaped piece and retaining clip lying in the tunnel where the cable enters on the floor…is it meant to be attached to the bottom of the hand brake itself?

Easy to take things apart…not so easy to put them back again…

Title: Re: Hand brake questions
Post by: Brennie on September 30, 2021, 11:08:12

Anyone who can help ? It would be much appreciated..
Thank you

Title: Re: Hand brake questions
Post by: Sead on September 30, 2021, 11:19:55

The black part isnt a part of handbrake system.
See attached pics for details.

Title: Re: Hand brake questions
Post by: BobH on September 30, 2021, 12:23:50

Looks like you're missing item number 9 on link below

https://www.niemoeller.de/en/w113/w113/B042/426

Title: Re: Hand brake questions
Post by: Brennie on September 30, 2021, 13:23:36

Yes…that is exactly what I need…now to try and find one..maybe I could fashion one using a washer and bolt and some epoxy as a stop gap…
Thank you

Title: Re: Hand brake questions
Post by: BobH on September 30, 2021, 15:30:16

I know Niemoeller have a minimum order value, so it might be worth you making one or speaking to the SL Shop

Title: Re: Hand brake questions
Post by: Brennie on October 08, 2021, 13:58:56

Thank you all…made one…