Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: Scope9 on July 09, 2021, 21:27:34

Title: Seeking A/C compressor bracket to replace “monster bracket”.
Post by: Scope9 on July 09, 2021, 21:27:34

I have been hunting in vain for a sedan A/C bracket to move a new compressor up top.  Found one on eBay but when I received it I found the end that mounts to the intake manifold is different than the examples I have seen posted on the forum.
Could sure use some advice on where I might locate a correct one.

Title: Re: Seeking A/C compressor bracket to replace “monster bracket”.
Post by: m300cab on July 16, 2021, 12:58:48

then your alternator will  be low.
if your in a thunderstorm with flooding your car will stall.
good to keep your alternator high away from the ground

Title: Re: Seeking A/C compressor bracket to replace “monster bracket”.
Post by: dirkbalter on July 16, 2021, 17:31:58

@ Michael, "It never rains in Southern California"  8)

Scope,
I have a 108 with the AC bracket you are probably talking about. What exactly are you looking for? I am also integrating AC into the 113 using the buds benz kit. What type of compressor are you using?

Title: Re: Seeking A/C compressor bracket to replace “monster bracket”.
Post by: Shvegel on September 08, 2021, 22:44:53

You will also need the thermostat neck as the sedan one is taller than the Pagoda one.