Pagoda SL Group
W113 Pagoda SL Group => Wanted To Buy => Topic started by: DavidAPease on April 13, 2021, 02:11:02
-
I need the L-shaped metal part that attaches to the back of the trunk lock (circled in photo). This part does not appear to have its own part number, but I thought someone might have a spare one (with or without the screw that holds it in place) lying around somewhere.
Thanks,
-David
-
A piece of metal from the hardware store, a vice, a hacksaw, a drill and a hammer should do nicely!
-
Thanks, Mike. That is my fallback plan. However, I wasn't sure if this piece has some kind of alignment "tenon" to fit the slot in the back of the lock, and fabricating that might be a little challenging for someone who's not a metalworker. Thought I'd try the easy way first. ;)
-David
-
As I expected, there are tabs on the back of the piece to keep it aligned with the lock barrel. As someone with little metalworking skill or equipment, I might have a bit of difficultly with those.
-David
-
I had this need also, never found one, but the dealer has the whole assy avail, not too much $$$
-
Hello David,
The W110/W111 fintail sedan should have the same L-shaped piece.
Sometimes its best to buy a very bad old (sedan or SL's) lock. This part usually never deteriorates...
Best,
Achim
-
Thanks, Achim,
I'll look around for one.
-David