Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: stickandrudderman on March 01, 2021, 15:42:50

Title: A0008330052
Post by: stickandrudderman on March 01, 2021, 15:42:50

I need the small black cap for the right side heater venitlation controls. None of my usual suppliers can help.
SLS part number is 883170.
Preferably from europe due shipping but will look further afield if I have to.

Title: Re: A0008330052
Post by: MikeSimon on March 01, 2021, 16:31:55

Do not have any info, but what I nice way to say it: "Look further afield"!  8)

Title: Re: A0008330052
Post by: stickandrudderman on March 01, 2021, 16:41:08

pfielen dank!

Title: Re: A0008330052
Post by: Merc_Girl on March 01, 2021, 21:57:22

Colin
I know you won’t be enamored by my answer, but have you tried the SL Shop. They have a lot of NOS from the Netherlands which they haven’t put on their website, as yet.

Aware that you may consider them as ‘competitors’, but if you can put that aside, they may be able to help

Katie

Title: Re: A0008330052
Post by: stickandrudderman on March 01, 2021, 22:11:31

Quote from: Merc_Girl on March 01, 2021, 21:57:22

Colin
I know you won’t be enamored by my answer, but have you tried the SL Shop. They have a lot of NOS from the Netherlands which they haven’t put on their website, as yet.

Aware that you may consider them as ‘competitors’, but if you can put that aside, they may be able to help

Katie

Thanks Katie. I don't regard them as competitors and I do genuinely admire what Sam Bailey has achieved with his degree in marketing, I just don't like them as a company for reasons I won't go in to here. I will only buy from them if there's absolutely nowhere else to get it.

Title: Re: A0008330052
Post by: Pawel66 on March 01, 2021, 23:23:23

Just to save you the trauma I went afield and checked the SL shop, but they have the plug only, not that cap. The part you mentioned is not, I think, a Pagoda part, actually, it is W108 or W109. So they have the bulb cap.

Title: Re: A0008330052
Post by: WRe on March 02, 2021, 08:03:42

Hi,
for me, this is a candidate for the 3D-printer. These parts are no longer available, crumble over time and are often searched for.
...WRe

Title: Re: A0008330052
Post by: dirkbalter on March 02, 2021, 15:19:16

Wre,
It does not look like a very difficult part to print. The task is to have or get good dimensions of an existing one to create a model. If some cane supply these, I am more than happy to give it a try.

Title: Re: A0008330052
Post by: Merc_Girl on March 02, 2021, 21:20:26

Quote from: stickandrudderman on March 01, 2021, 22:11:31

Thanks Katie. I don't regard them as competitors and I do genuinely admire what Sam Bailey has achieved with his degree in marketing, I just don't like them as a company for reasons I won't go in to here. I will only buy from them if there's absolutely nowhere else to get it.

 No problem, only a suggestion. I call them up if I want something, as said, they have a lot of things no on the website

However, luckily we seem to have a lot of clever bunnies who can do this 3D printing witchcraft. That seems an amicably  better solution so long as we are able to find a part to start with 😁

Title: Re: A0008330052
Post by: Memmo on March 05, 2021, 17:37:53

Hi Collin,

I think I have it.
I will check and write you tomorrow.

Best regards Memmo

Title: Re: A0008330052
Post by: stickandrudderman on March 14, 2021, 19:50:07

For the benefit of those who might find this thread in the future:
I had to pay commercial prices for the digital drawing and production of this part.
If you need it let me know and I can have one printed for you.