Pagoda SL Group

W113 Pagoda SL Group => W11x chassis cars => Topic started by: col320ce on August 21, 2020, 05:44:58

Title: W11X glovebox spring
Post by: col320ce on August 21, 2020, 05:44:58

Is the spring mechanism on the w111 coupe glovebox on both hinges or just one?
Thanks!

Title: Re: W11X glovebox spring
Post by: cfm65@me.com on August 21, 2020, 16:20:17

Hi Col,
I used to have a 61 Cabrio and 63 Coupe and if I remember correctly, the glovebox door is the same as the Pagoda. Only one long hinge and only one spring setup on the inboard side of the box. I say ‘inboard’ because my Cabrio was a lefty and the Coupe was a RHD.
Regards
Chris
Cape Town

Title: Re: W11X glovebox spring
Post by: wwheeler on August 21, 2020, 19:40:48

There is only one spring on the box door. On my LHD, it is on the lower left corner of the door. Not sure if that changed with RHD. The mechanism is a bit different from the W113 in that there is only one fork and is loaded differently. Fork is #110 689 00 32 and the spring is #110 993 09 01 if you need those. I don't remember if it is a long hinge or two short ones.

I didn't take detailed pictures when I redid my dash. :(

Title: Re: W11X glovebox spring
Post by: col320ce on August 22, 2020, 00:34:21

Thanks for the replies!