Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Harry on March 24, 2020, 22:20:19

Title: Fresh air line to cold start injection
Post by: Harry on March 24, 2020, 22:20:19

Stumped (again).  I am installing the air line to the injector on the intake manifold and I’m not sure about the routing.  Does it go above or below the throttle linkage along the firewall?  In the attached photo, I have it just resting on top (above) the linkage.

Thanks!
Harry

Title: Re: Fresh air line to cold start injection
Post by: mrfatboy on March 24, 2020, 23:13:59

it should go below. See pic.

Title: Re: Fresh air line to cold start injection
Post by: Harry on March 24, 2020, 23:29:31

Excellent.  Thanks so much

Title: Re: Fresh air line to cold start injection
Post by: Pawel66 on March 25, 2020, 13:02:04

You may want to pay attention how far it is from the firewall. I had it 1-2cm from the firewall and I had it squeaking from time to time - took me a while to figure out the source of this noise. Then I just pushed it in deeper into the hose to FIP.

Title: Re: Fresh air line to cold start injection
Post by: Harry on March 25, 2020, 16:40:45

Thanks Pawel - I'll look at that.  (I hate a squeak.)  :)