Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: Benz Dr. on January 10, 2020, 05:47:02

Title: 230SL IP parts
Post by: Benz Dr. on January 10, 2020, 05:47:02
I'm looking for the warm running device that sits on top of a 230SL injection pump. I need the base, slide valve, and metal tube with two pipes for coolant hoses. I can get the thermostat but I will take a used one that works. Heat it up and as long as the pin move .050'' it's OK.

I need enough parts to do two different pumps but I could make one work with just the internal slide valve and the metal tube on top for one pump. The other pump needs everything.   
Title: Re: 230SL IP parts
Post by: Pawel66 on January 10, 2020, 08:01:54
Thermostat housing and thermostat you have here: https://www.sls-hh-shop.de/main/en/07-mech-injection-air-intake-07-b-injection-pump-c-3_2334_116
Title: Re: 230SL IP parts
Post by: Benz Dr. on January 10, 2020, 17:35:17
Thanks,
that only covers the tube with pipes that holds the thermostat. It's a start though.

I would still need a slide valve.
Title: Re: 230SL IP parts
Post by: mnahon on January 11, 2020, 19:28:50
Dan,

I noticed these items on ebay; not sure if that's what you're looking for...

https://www.ebay.com/itm/Mercedes-W108-and-W113-thermostat-cover/303440632008?hash=item46a67898c8%3Ag%3AKsYAAOSw1adeGRJw&LH_ItemCondition=4

https://www.ebay.com/itm/Mercedes-W108-and-W113-thermostat-cover/303440630527?hash=item46a67892ff%3Ag%3AcmoAAOSwhJteGRHT&LH_ItemCondition=4

https://www.ebay.com/itm/Mercedes-W113-and-W108-warm-running-device-used/303440626556?hash=item46a678837c%3Ag%3AsEoAAOSwbAZeGQ%7EG&LH_ItemCondition=4

Meyer