Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: hauser on September 04, 2019, 05:32:49

Title: Reproduction All Red
Post by: hauser on September 04, 2019, 05:32:49

Hey Guys

I've had my all red repro lights on my car since the fall of 2003.  Since then I have had zero issues until two days ago. 

I washed my car and after drying I use the air compressor to blow out the hidden water in those tiny nooks.  When moving the air over the left tail light the cent reflector came loose but went back into place.  I can't leave things like this and need a remedy.

I'm thinking of using silicone or some other type adhesive.   Would like to hear your thoughts for on whats best for plastic.

Thanks

Title: Re: Reproduction All Red
Post by: ejboyd5 on September 04, 2019, 11:54:55

Perhaps a picture would better describe your exact problem.

Title: Re: Reproduction All Red
Post by: Tyler S on September 04, 2019, 13:43:52

Mine did the same thing. They were just glued in instead of being heat melted in place like the original. I used clear 2 part epoxy to reattach them.