Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: StevenF on April 25, 2019, 13:50:48

Title: Door Seal Screw / Washer Question
Post by: StevenF on April 25, 2019, 13:50:48

Does anyone know the size of this screw and washer?
https://www.sl113.org/forums/index.php?topic=27991.msg201464#msg201464

Regards
Steven

Title: Re: Door Seal Screw / Washer Question
Post by: Pawel66 on April 25, 2019, 15:12:22

What I used was not original, sorry:
washer A 000 985 05 62 that I ordered for my W463
metal sheet screw was 2.9mm stainless from Wurth

What I see in the EPC next to the seal:

N 007983 004251
TAPPING SCREW
DOOR LINING TO RETAINING PLATE 2pcs   

N 900056 004508
COUNTERSUNK WASHER
DOOR LINING TO RETAINING PLATE 2pcs

Not 100% sure though...

Title: Re: Door Seal Screw / Washer Question
Post by: StevenF on April 25, 2019, 18:23:23

Heard back from the Classic Center


SCREW 2X16mm with a tapered seat and dome top phillips     007983 002208
Washer cone shaped id 3mm od 8mm     000 985 09 62

Title: Re: Door Seal Screw / Washer Question
Post by: Pawel66 on April 25, 2019, 21:03:17

Then we know what is correct, thanks!

Title: Re: Door Seal Screw / Washer Question
Post by: StevenF on April 25, 2019, 21:52:13

I always look out for our Pagoda Family!