Pagoda SL Group

W113 Pagoda SL Group => Wanted To Buy => Topic started by: Larry & Norma on October 10, 2018, 16:10:21

Title: Cable end
Post by: Larry & Norma on October 10, 2018, 16:10:21

Looking for the plastic connector which connects the end of the cable from the gear
selector to the starter inhibit/ reverse light switch on the bulkhead. Uk automatic
RHD car. I think it may be part no. A0009910822. Thanks

Title: Re: Cable end
Post by: 114015 on October 11, 2018, 22:06:32

Hello Larry,

What you might be looking for and what you refer to by the parts number is  a ball socket,
correct?


BALL SOCKET  -    A 000 991 0822     -    $0.41
Replaced by: A  608 991 0022    
BALL SOCKET    -      001    A 608 991 0022     -    $3.31


Found this on Nemiga..., but cannot prove the availability from MB Classic yet.

You might want to try these numbers with your local MB dealer...

Good luck & best,

Achim

Title: Re: Cable end
Post by: Larry & Norma on October 12, 2018, 10:43:26

Thanks for that Achim, the search begins.
Best
Larry

Title: Re: Cable end
Post by: WRe on October 12, 2018, 12:01:21

Hi,
I would assume that's a normal ball socket (plastic or metal with one or two open sides) with a M5 thread like this here: https://www.sls-hh-shop.de/main/en/mercedes-190sl-w121-/07-solex-carburetor/ball-socket-with-rt-hd-threads-p-4378.
...WRe

Title: Re: Cable end
Post by: Larry & Norma on October 12, 2018, 12:30:16

I will try one of the throttle linkage ones and see if it fits. Could be a solution.

Title: Re: Cable end
Post by: Benz Dr. on October 12, 2018, 15:45:59

That's what I use.

Title: Re: Cable end
Post by: Jonny B on October 12, 2018, 18:57:21

On my car, LHD - 250 SL, the connector for the transmission linkage cable to the neutral lock out switch has a longer shank (threaded piece) than the ones for the throttle assembly.