Pagoda SL Group
W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: cfm65@me.com on May 29, 2016, 08:07:33
-
Hi Gents,
I see there are quite a few threads re the firewall pad. However my question us about the edge. I would like to improve the finnish of the edge where the backing is visable. Any suggestions would be much appreciated, black paint, marker pen, black underbody paint, maybe just a little black silicon on the edge? What have you guys done.
Regards
Chris
-
That is an older type replacement pad. It is all that was available for some time. The newer pads have the correct diamond patern and the backing is black. Here's a link to one seller that has the newer replacement. They have both left and right hand drive versions.
http://www.authenticclassics.com/Mercedes-230SL-250SL-280SL-Firewall-Pad-set-p/auth-003538.htm
-
We use black shoe dye for things like that.
-
TKS Tyler, TKS Doc,
Shoe dye it is.
Regards
Chris
Cape Town
-
I just installed one one my 67 230SL bought from vintage Euro Part and it has black backing. Their URL is: www.vintageeuroparts.com
-
I've used black Plasti-dip for that purpose a few times. Its a vinyl/rubber based liquid that creates a black rubber surface that seals of the edges and is water/oil etc resistant.
http://www.amazon.com/Performix-11203-Multi-Purpose-Coating-Aerosol/dp/B0006SU3QW (http://www.amazon.com/Performix-11203-Multi-Purpose-Coating-Aerosol/dp/B0006SU3QW)
Hans