Pagoda SL Group

W113 Pagoda SL Group => W11x chassis cars => Topic started by: amazon69 on February 12, 2016, 21:15:54

Title: W111 3.5 fan shroud
Post by: amazon69 on February 12, 2016, 21:15:54

Hi there,

Does anyone have a fan shroud for a w111 3.5? Even one from a w108 3.5/ maybe a w116 etc that may fit with a bit of fettling?
I'm typing this with the only finger I've got left, and I'd like to keep it.
Thanks.
Dave

Title: Re: W111 3.5 fan shroud
Post by: perry113 on February 13, 2016, 13:30:41

Ouch brother!!!

Title: Re: W111 3.5 fan shroud
Post by: cynewan on February 13, 2016, 19:49:46

The original 3.5 fan shouds are VERY hard to come by (It could cost you an arm and a leg ...literally. ive been down this road..... Check with Palm Beach Classics to see ).
Alternatively,I think the shrouds with part # 1085050255 might work. i have seen a few on ebay for way less.

Title: Re: W111 3.5 fan shroud
Post by: cabrioletturbo on February 14, 2016, 06:47:34

Let me check tomorrow. I parted a 3.5 W109 last spring and I know I have radiator, but cannot recall what happened with the shroud.

Title: Re: W111 3.5 fan shroud
Post by: JPMOSE on February 16, 2016, 17:04:17

NLA at Mercedes, but I notified you of that on the other site.

Title: Re: W111 3.5 fan shroud
Post by: twinoakchef on February 20, 2016, 20:22:21

You can always make a fiberglass shroud. I made one for my W111. It took me several tries because I had never worked with fiberglass. It looks and works great.

 Below is a link
http://www.jeepforum.com/forum/f8/building-fan-shroud-caution-long-pic-heavy-1219348/

Title: Re: W111 3.5 fan shroud
Post by: cabrioletturbo on February 21, 2016, 17:13:49

I checked mine is MIA. Maybe I make another try when it is a bit warmer so I could haul stuff out of my garage.

Title: Re: W111 3.5 fan shroud
Post by: cabrioletturbo on October 05, 2016, 23:22:24

Quote from: amazon69 on February 12, 2016, 21:15:54

Hi there,

Does anyone have a fan shroud for a w111 3.5? Even one from a w108 3.5/ maybe a w116 etc that may fit with a bit of fettling?
I'm typing this with the only finger I've got left, and I'd like to keep it.
Thanks.
Dave

Hey amazon69, I found the shroud! Contact me via PM if you still need one.