Pagoda SL Group
W113 Pagoda SL Group => Electrical and Instruments => Topic started by: Nirmal on October 18, 2014, 05:31:49
-
The horn ring on my 280 sl rattles which can be quite annoying. As per the Technical Manual this is an easy fix and I need to replace the A1154640035 Fixing sleeve. Unfortunately I cannot find this with the vendor in Germany. Any suggestion?
Nirmal
1969 280sl
1953 MG TD
2012 Jaguar XJ
-
Hi,
are you sure with the spare part you mentioned because these are the fixing sleeves (3) of the horn pad?
I would assume that the springs of the horn mechanism is broken or bad.
...WRe
-
My steering wheel on my 1963 Fintail "clunks" at certain angles. I'm concerned because I adjusted the screws on the contact ring pictured and think I should not have. I'm going to pull the steering wheel and try to figure out why it clunks. In particular it clunks when I back down the driveway and have fine adjustments to steering to navigate down the driveway. This is of course only after I replaced the shift bushings in the column manual transmission, which required removal of the steering bearing, so I'm suspicious that I replaced something in there wrong....