Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: duffelpud on January 24, 2012, 04:41:03

Title: Supplier for Differential Mount Assembly?
Post by: duffelpud on January 24, 2012, 04:41:03

I need to replace mine as I begin the quest to eliminate noise from the back end.  Does anyone have a link to a source?  I believe I need parts 130-135 here: http://www.sl113.org/forums/uploaded/jeffc280sl/200824181112_cross%20strut.jpg (http://www.sl113.org/forums/uploaded/jeffc280sl/200824181112_cross%20strut.jpg)

Title: Re: Supplier for Differential Mount Assembly?
Post by: Iconic on January 24, 2012, 18:34:17

I recently bought the main part (130) from the MB Classic Center.
The part was correct and works as it should ... of course.

(I have no affiliation with the MB Classic Center.  :D I wish I did.)

Title: Re: Supplier for Differential Mount Assembly?
Post by: franjo_66 on January 24, 2012, 21:12:31

I replaced all my parts (as per your diagram). These were bought from the following vendors:

www.autohausaz.com

http://www.sls-hh-shop.de/index.php/language/en/cat/c3_Mercedes-Benz-230SL-250SL-280SL-Pagoda--R113-W113-.html

Regards
Frank

Title: Re: Supplier for Differential Mount Assembly?
Post by: GGR on January 25, 2012, 20:57:26

slightly OT, but may be of interest for the OP: The W112 p/n is different. The mount does not have these openings in the rubber part and I believe the shore is harder. Would anybody know the reason? Would fitting the W112 mount be an improvement ? What would be the draw backs ?