Pagoda SL Group
W113 Pagoda SL Group => W11x chassis cars => Topic started by: perry113 on March 06, 2010, 02:58:56
-
Here's another mystery part to project 111. The part encrypted this gizmo reads A 000 541 00 63
Does this ring any bells??
-
Never seen it Peter, it may be something to do with emission control from the 3.5!
-
I don't have a clue either, but will pass along to a good friend of mine with a 111 and see if it rings any bells with him.
-
If you have access to the EPC, you can search with that number and it will show the applications. I don't have access to EPC right now, but can look that number up tonight.
-
I looked on the MB EPC system and used the search function. It could not come up with a match for the number. The number might have been changed to another. I would contact the Classic Center and see if they can match it.
-
Thanks for looking.
I will run it by the classic center.
-
I think it's a seal wedge from the rare scrunge thruster fluid coupler...probably.
-
I think it's a seal wedge from the rare scrunge thruster fluid coupler...probably.
YA! The one that located by the scrimins valve.
-
YA! The one that located by the scrimins valve.
The right hand one or the left hand one?
-
It's part of the Flux Capacitor from a DeLorean. 8)
-
Oh, it's not original then. The Flux Capacitor was an aftermarket installation on DeLoreans, long after series production ceased in the early 1980's! (I sold DeLoreans when they were new.)