Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: rmmchl on August 03, 2008, 11:31:37

Title: glove box light wires
Post by: rmmchl on August 03, 2008, 11:31:37

2 wires from the glovebox light screw into the side of the vent box(black plastic box) 2 connect on one terminal and 2 wires screw into the other terminal. I have the box removed for heater core work and forgot how they go back-------do the 2 wires from the glove box conect to the same terminal?-does anyone have a picture?

Title: Re: glove box light wires
Post by: 66andBlue on August 03, 2008, 12:07:30

Have you tried the search function?
It would find you this, for example: http://www.sl113.com/forums/index.php?topic=9109

Title: Re: glove box light wires
Post by: rmmchl on August 03, 2008, 13:05:17

thanks you 66 blue----------looks like both wires connect to one screw and the 2 from the clock connect to the other-ps-I removed my heater core-I will take it to the shop to rebuild and remove the valve I dropped in it. Also one bracket came off of heater core-I guess they can solder it back on-I dont know how it was connected-the core is retained by 4 screws that bolt from both sides with a bolt and nut. Also, the lid was loose again. Years ago , I tried to jb weld it. It held for a few years. I.m going to leave it off this time. Would you know where to get the replacement foam that was glued on the core?