Pagoda SL Group
W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: Skitzerow on October 31, 2003, 20:30:48
-
Any one know where to get an automatic plastic shift gate insert for a 1968 280sl.
I found a new one, but they want $ 85.00 for it.
Ya, I can afford it, but I have been affording too much lately.
SDK
-
I got one at Van Dijk two years ago and it was more reasonable than $85 though I don't remember how much. Try one or more of the vendors in our database:
http://sl113.org/data/show_table.asp?table_name=usr_parts_and_service_suppliers
You can sort this database by country, name, type of parts or services rendered, etc.
Cees Klumper in Amsterdam
'69 white 280 SL automatic
-
Try sl tech in Maine I believe it was 40$. Single cheapest most
beneficial aesthetic modification I've done. Immediately after having it replaced, went to a show and not one of the 6 other 113's had an intact gate. Not even the near perfect show quality car!
-
Hi, Do you happen to have SL Tech's phone # in Main? I need two of those gate inserts.
Thanks,
Brian
-
Here's the info out of the vendor table on the homepage (see link in the post I did below, PLUS: check out the homepage by clicking on the blue logo box in the top left corner of this page):
SL Tech USA
1364 Portland Rd.,
U.S. Route 1, Arundel, ME 04046
sltechw113.com
(207) 985-3001
Proprietor: Gernold Nisius
Cees Klumper in Amsterdam
'69 white 280 SL automatic
-
I received my new shift gate plastic from Ray Paul; 1-800-293-2358; SLClassic.com. I believe it was about $40.
Bruce; Blaugrun(green) 1970 280SL; IL