Pagoda SL Group

W113 Pagoda SL Group => Body, interior, paint, chrome, and cosmetic items => Topic started by: franjo_66 on July 01, 2008, 06:11:02

Title: How to get correct shape for 230SL dash retrim?
Post by: franjo_66 on July 01, 2008, 06:11:02

I'm about to recover my upper & lower dashboard in black MB-Tex. However, the previous owner had it retrimmed with incorrect material and the shape along the edges of the dash are rounded (like the latter 280SL dashboards).

But I am 100% certain that the correct finish for the 230SL dash is the "squared-off" edging.

How is this achieved ? Is the shape a result of the foam padding under the dash material ? Any pointers appreciated. Did the 230SLs actually have foam/padding under the MB-Tex or leather that covered the dashboards ?

Thanks & Rgds
Frank
1965 230SL Black/RHD/Auto

Title: Re: How to get correct shape for 230SL dash retrim?
Post by: DaveB on July 01, 2008, 08:01:52

Yes they have a hard foam pad with a squared edge. Let me know if you'd like a photo.

Title: Re: How to get correct shape for 230SL dash retrim?
Post by: franjo_66 on July 01, 2008, 16:48:54

Hi Dave

Thanks for that. If you could email me a photo to franjo4@optusnet.com.au that would be much appreciated.

Any idea if this foam can be bought here in Australia ? Otherwise is it available from places like GAHH, Buds, etc ?

Thanks & Rgds
Frank

Title: Re: How to get correct shape for 230SL dash retrim?
Post by: DaveB on July 05, 2008, 08:19:18

Hello Frank,
Here's a less-than-ideal photo!
The pad appears to be a strip of dense latex-like foam, dimensions 28 x 10mm, glued to the front of the aluminium dash panel. The top of the dash has a thin layer of lighter, more open textured foam, usually disintegrated to yellow powder by now. I have never seen either padding material sold by parts suppliers. I assume the upholstery shops have their own stock of suitable rubber and foam.

Download Attachment: (http://images/icon_paperclip.gif) 230sl dash.jpg (http://www.sl113.org/forums/uploaded/DaveB/200875101821_230sl%20dash.jpg)
35.4 KB

Title: Re: How to get correct shape for 230SL dash retrim?
Post by: 66andBlue on July 05, 2008, 12:56:13

Frank,
here are some pictures of the dash padding.
If you still have the original wood and aluminum frames then you should be able to recreate the shape. The most difficult part will be the curve on the left. You can the see how it looks under the MB-Tex on the right side.
Good luck!
(http://www.sl113.org/forums/uploaded/66andBlue/200875145046_DashPadding.jpg)
(http://www.sl113.org/forums/uploaded/66andBlue/20087514526_DashPadding-2.jpg)

Title: Re: How to get correct shape for 230SL dash retrim?
Post by: franjo_66 on July 06, 2008, 05:56:50

Hi Alfred & Dave

Many thanks to both of you for the photos & input. It's much appreciated.

Rgds
Frank