Pagoda SL Group

W113 Pagoda SL Group => Electrical and Instruments => Topic started by: hands_aus on January 13, 2008, 04:29:55

Title: wiper switch problem
Post by: hands_aus on January 13, 2008, 04:29:55
A friend has a 280sl with a wiper switch that could need replacing because the wiper push function of the switch is not 'normal'

My friend wrote an email explaining his problem

quote
My issue is that everything work but end out cap is “ bending” i.e. something inside that secures it to inner section is not right, when is normal position an done pushes outwards to engage washers. Then one pushes in to engage wipers, it “rubs” on inner part and is not the normal easy push and click action
unquote

Is this fixable?

Is the wiper switch on a Lhd car on the left or right of the steering column?

Is it possible to use a Lhd car wiper switch in a RHD car?
If yes would wiring changes need to be made?

all information welcome, thanks


Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Title: Re: wiper switch problem
Post by: rwmastel on January 13, 2008, 12:24:01
quote:
Originally posted by hands_aus

Is the wiper switch on a Lhd car on the left or right of the steering column?
Left.

Rodd
Pagoda Technical Manual
please contibute: http://www.sl113.org/wiki/pmwiki.php
1966 230SL
2006 C230 Sport Sedan
Title: Re: wiper switch problem
Post by: hands_aus on January 14, 2008, 05:16:58
Rodd

Thanks.

I kinda think the wiper switch could be turned over and plugged in maybe need some wires swapped.

I haven't seen a switch close up but I reckon it would have symmetrical mountings.

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Title: Re: wiper switch problem
Post by: hands_aus on January 16, 2008, 05:59:24
Anybody else have any knowledge to offer?

Naj, JoeA?

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto
Title: Re: wiper switch problem
Post by: Naj ✝︎ on January 16, 2008, 08:50:26
quote:
Originally posted by hands_aus

Anybody else have any knowledge to offer?

Naj, JoeA?

Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto


Column switch A002 545 2924 lhd
and A002 545 5424 rhd

naj

68 280SL
Title: Re: wiper switch problem
Post by: hands_aus on January 17, 2008, 05:50:59
Naj,

Thanks for the numbers.

regards


Bob Smith (Brisbane,Australia)
RHD,1967 early 250 SL, auto