Pagoda SL Group

W113 Pagoda SL Group => Drive train, fuel, suspension, steering & brakes => Topic started by: glennard on January 01, 2008, 17:26:33

Title: Crankshaft oil seal
Post by: glennard on January 01, 2008, 17:26:33

Looking for a 45 67 oil seal for a 127.982 engine.  The 67mm O.D. seems 'non-standard'.   Any ideas?

Title: Re: Crankshaft oil seal
Post by: merrill on January 01, 2008, 18:56:15

your local dealer or one of the engine rebuilders?  metric motors or noels?

Matt
Austin Tx
66 230 sl - "white"
78 300 D - Blue
98 C230

Title: Re: Crankshaft oil seal
Post by: ja17 on January 01, 2008, 19:28:22

Hello Glenn,

I think all these 6cyl. W113 engines used the same size front crank seal.

Joe Alexander
Blacklick, Ohio

Title: Re: Crankshaft oil seal
Post by: 114015 on January 02, 2008, 14:56:08

127.982 engine? 220 SE?[:0]
127.981 = 230 SL
129.982 = 250 SL

All this is not really important for crankshaft front seal.



Achim
(Magdeburg, Germany)

Title: Re: Crankshaft oil seal
Post by: glennard on January 03, 2008, 13:28:37

A oil seal SKF 17907(NAPA-about $11) is 1.772" I.D.  2.638" O.D.  0.394" high and seems to meet the specs- 45 67 10/15.