Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: n/a on February 16, 2007, 12:42:49

Title: Ragtop Well Drain
Post by: n/a on February 16, 2007, 12:42:49

I have a '66 230 sl which I'm saving from the depths.
I notices as I was replacing the rocker panels a plastic drain tube hanging down from the ragtop well,the drain tube dosen't seem to have an exit point. Is there a exit point location? Or did this danging drain tube just help in the process of rust?
Thanks, Barlow

Title: Re: Ragtop Well Drain
Post by: TheEngineer on February 16, 2007, 22:05:30

As I remember, it goes into the wheel well.

Title: Re: Ragtop Well Drain
Post by: n/a on February 17, 2007, 06:17:33

Thank you, I'll try to look at a finished car to see the exact exit location and what is used for a gromet to hold the tube in place.

Title: Re: Ragtop Well Drain
Post by: Naj ✝︎ on February 17, 2007, 09:00:48

Barlow,
 

quote:

---

a plastic drain tube hanging down from the ragtop well,the drain tube dosen't seem to have an exit point. Is there a exit point location?

---

If you insert a thin long rod thru the drain hole. it should show up in the gap below the lower trim

Download Attachment: (http://images/icon_paperclip.gif) Wtr_drn049.JPG (http://www.sl113.org/forums/uploaded/naj/200721710023_Wtr_drn049.JPG)
20.86 KB

naj

68 280SL