Pagoda SL Group
W113 Pagoda SL Group => General Discussion => Topic started by: vincesy on October 27, 2006, 17:40:31
-
Does anyone have problems with the hardtop's top latch coming loose during driving? I have this problem even with the soft top. I'm wondering if there's an easy way to fix or adjust this. Thanks.
-
It's possible that the rubber washers that sit around the locking pins need to be replaced. I replaced mine and it has made the softop and hardtop tighter against the windshield. Easy to replace!
Bob
bpossel (Memphis, TN.)
'71 280SL / '97 E320
-
Bob, thanks for the advice. Is it something that one can just fish out and replace with new washers? I don't see washers around the locking pins. Maybe that's why I have this problem?
-
SLS carries these hard rubber washers. They simply slide over the locking pins (no glue) on both the hard top and soft top. They are a very tight fit, stretching a bit while sliding over the pin.
Bob
Click on this link and scroll down to the softtop page. Refer to item #43 (Buffer ring on lock)
http://213.239.220.84/bin/dbframes.phtml?mid=IN02
bpossel (Memphis, TN.)
'71 280SL / '97 E320
-
Bob,
Thanks for the advice. I've ordered the rubber washers and hopefully this cheap and easy solution does it. I don't even know how long the car has been without these washers.
Vincent