Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: dwilli3038 on July 16, 2006, 18:45:02

Title: ground wire
Post by: dwilli3038 on July 16, 2006, 18:45:02

Can anyone tell me the correct placement of this ground wire? It was not hooked to anything. When I removed the injector pump I found the wire laying on the pump.

Download Attachment: (http://images/icon_paperclip.gif) DSCF5384r.JPG (http://www.sl113.org/forums/uploaded/dwilli3038/2006716203646_DSCF5384r.JPG)
40.15 KB

Daryl
'64 230 SL
Serial # 508

Title: Re: ground wire
Post by: dwilli3038 on July 16, 2006, 18:46:40

here is the other of the wire

Download Attachment: (http://images/icon_paperclip.gif) DSCF5388r.JPG (http://www.sl113.org/forums/uploaded/dwilli3038/2006716204627_DSCF5388r.JPG)
40.65 KB

Daryl
'64 230 SL
Serial # 508

Title: Re: ground wire
Post by: J. Huber on July 16, 2006, 19:08:19

Hey Daryl.

I have a large ground strap near that area. The one end you show that is connected on yours: on mine it is a bit closer to the IP pump on the block. My other end goes over to the main harness sort of near the ballast on the wheel well.

James
63 230SL

Title: Re: ground wire
Post by: 91lux on July 16, 2006, 23:40:55

Hi

My wire goes to the point where the negative cable from battery is terminated to the body, just below the resistor/battery. Actually it is a braided strap from the engine point as yours to the body.


91lux