Pagoda SL Group

W113 Pagoda SL Group => General Discussion => Topic started by: jeffc280sl on March 20, 2006, 16:10:35

Title: Door/window alignment process
Post by: jeffc280sl on March 20, 2006, 16:10:35

I've never been content with the alignment of these items on my car.  Had the doors off recently and I'm looking for some help with the steps used to fine tune the door gaps.  There are hinge bolts on both the door and jamb which are used for this purpose.  Can anyone advise the steps required to get these gaps just right?

Many thanks,

Jeff C.
1970 280SL 4-speed

Title: Re: Door/window alignment process
Post by: JPMOSE on March 21, 2006, 16:01:53

Good write-up on window alignment and rattles on the other Pagoda website:

http://pagoda113.com/groupee/forums/a/tpc/f/3296041521/m/6396041521

http://pagoda113.com/groupee/forums/a/tpc/f/3296041521/m/2496041521

Best Regards,

J. P. Mose
1968 250SL

Title: Re: Door/window alignment process
Post by: jeffc280sl on March 21, 2006, 18:47:21

Thanks JP!

Jeff C.
1970 280SL 4-speed