Pagoda SL Group
W113 Pagoda SL Group => Items for Sale => Topic started by: Sead on August 07, 2025, 07:32:59
-
Another one better than new example.
Lifetime warranty!
Price 690,€ incl fast DHL shipping
Repair service starting at 250,-
Best regards
Sead
Garage_230SL_Sarajevo
-
Sead,
I assume for LHD car?
Did all 230SL have "flash to pass" feature? I remember being able to pull the stalk towards me to flash the brights.
Thanks
-
The switches were all set up for flash-to-pass, but the feature did not work on many 230SLs destined for the U.S. market. Mine didn't when I acquired it in 2003. However somewhere on this site (or one of its predecessors) there were simple instructions involving doing something with a taped wire on the rear of the fuse block. I don't remember exactly the procedure (it was a couple of decades ago) but my flash to pass has worked ever since.
There is something on this in the Technical Manual under Electrical/Lights/Light switch, then scroll down to Flash to Pass.
-
My switch works but the plastic shell is broken. Can you replace that?
-
My switch works but the plastic shell is broken. Can you replace that?
John,
Sead can do it!
Mike,
My Italian delivery car has it, it works, but it's a very firm pull of the stalk! My stalk needs restored.
Sead,
I was curious if this specific unit was wired for it. I could send mine as a core exchange to reduce the cost. Or, someone else could buy this and I send mine to be restored and returned.
-
Mike,
My Italian delivery car has it, it works, but it's a very firm pull of the stalk! My stalk needs restored.
Mine's a little stiff, too, but I have always thought it as nicely weighted, in keeping with the solid as a bank vault feel of the rest of the car.
-
Your's is a little stiff, I felt like I was going to break mine every time I used it. Mine also has issues with signaling L and R.
-
Sead,
I assume for LHD car?
Did all 230SL have "flash to pass" feature? I remember being able to pull the stalk towards me to flash the brights.
Thanks
Its same for both, LHD and RHD. For 250/280 I have different plastic parts as symbols are placed differently.
-
My switch works but the plastic shell is broken. Can you replace that?
Sure I can do... I suggest full overhaul, as also mechanics will fail sooner or later..
Contact me pls via whatsapp: +38761528220
REgards
Sead
-
Its same for both, LHD and RHD. For 250/280 I have different plastic parts as symbols are placed differently.
Ok. And "flash to pass" works on this unit?
-
.
Lifetime warranty!
My lifetime or yours? ;D ;D. ::)
-
Ok. And "flash to pass" works on this unit?
sure it does ;D, as on any other
-
My lifetime or yours? ;D ;D. ::)
not mine. yours or your cars ;D ;D
-
LOL. 😆
PM sent.